HomeHome  PortalPortal  CalendarCalendar  GalleryGallery  FAQFAQ  SearchSearch  RegisterRegister  Log in  

Share | 
 

 heat shields

Go down 
AuthorMessage
Eds rmw



Posts : 63
Join date : 2016-06-29
Location : Piedmont sc

PostSubject: heat shields   Fri Jul 15, 2016 8:14 pm

Well, I fixed the broken exhaust manifold bolts on the drives side of my 95,but I still have an exhaust leak on that side. Are cracked manifolds
Common ? Can you remove the heat shields, and reinstall them ?

Ed
Back to top Go down
phantom 309

avatar

Posts : 5758
Join date : 2008-12-28
Age : 108

PostSubject: Re: heat shields   Fri Jul 15, 2016 10:44 pm

The heat sheilds are riveted on,.

Usually the pass side will break,.

did you use a new 3 point gasket for the down pipe?
Back to top Go down
Eds rmw



Posts : 63
Join date : 2016-06-29
Location : Piedmont sc

PostSubject: Re: heat shields   Sat Jul 16, 2016 9:24 am

Yes, I used the 3 point gasket, I used a fel-pro set on the manifold. I am going to do some more investigating to pinpoint the leak, definatly on the drivers side.
Back to top Go down
200OZ
Moderator
avatar

Posts : 1718
Join date : 2009-08-06
Age : 43
Location : Farmington NY.

PostSubject: Re: heat shields   Sat Jul 16, 2016 9:42 am

I had a passenger side exhaust manifold leak on my Roadmaster last fall. I replaced the gasket, and the bolts, but there was still a slight leak. The manifold had a small hole in it just above the mounting flange where the cat get attached. Looked to be rusted through.
Back to top Go down
Sponsored content




PostSubject: Re: heat shields   

Back to top Go down
 
heat shields
Back to top 
Page 1 of 1
 Similar topics
-
» Broadway Beacon Awards Honors Brooke Shields!
» Can atmospheric heat be extracted successfully for electricity generation?
» Alarming 2 Hour Collapse of Earth's Shields/180' W
» HAPPIEST POST
» I'm always with You!!

Permissions in this forum:You cannot reply to topics in this forum
GM Longroof Forum :: Longroof Tech :: Engine-
Jump to: