HomeHome  PortalPortal  CalendarCalendar  GalleryGallery  FAQFAQ  SearchSearch  RegisterRegister  Log in  

Share | 
 

 Roadmaster/LT1 Accessories - anodized parts, K&N filter, wiring and more

Go down 
AuthorMessage
jolo



Posts : 11
Join date : 2018-01-10

PostSubject: Roadmaster/LT1 Accessories - anodized parts, K&N filter, wiring and more   Sun Feb 04, 2018 4:19 am

I have some parts that came with my wagon and it's time to clear them out of the garage. Some were installed and some were not.

This is in the SF Bay area, but I can ship at the buyer's expense.

Let me know if you have questions or need more detailed pictures. Everything is sold as-is, so make sure you get all the pictures and information you need to make an informed decision.

Best way to get in touch is to email me at slowlyz at yahoo. You can also reply to the thread with your contact info.


Used Items

K&N 57-3011 $150
- The prior owner of my wagon installed this and electric fans. I don’t know if this will fit with the mechanical fan in place.
- The filter itself could use a cleaning.










MBA Products black anodized “LT1” resonator plug $25
- This replaces the plastic resonator volume that sits on top of the whole engine with the stock intake in place.






Red anodized crank pulley cover $50
- Has a couple nicks on it.
- Likely from MBA products, but I don’t see the marking




Red anodized underhood fuse box $30
- Likely from MBA products, but I don’t see the marking






MBA Products red anodized brake master cylinder reservoir $30






Red anodized throttle cable cover $50
- Likely from MBA products, but I don’t see the marking
- Shows some wear






Red anodized cruise control module cover $45
- Likely from MBA products, but I don’t see the marking







New Items

MBA Products red anodized “LT1” water pump cover $40




MBA Products red anodized AC compressor cover $50






MBA Products red anodized dipstick handle $25




NAPA Mileage Plus 3119 spark plug wire set $25




Innovative Wiring B-Body Electric Water Pump Harness $40




Headlight trim $40
- I never installed this, but I think it closes out gaps around the headlight that are visible with the hood open.








Innovative Wiring Opti Harness $40
- ‘95-’96




Energy Suspension 3.5183G sway bar bushings $15
- labeled for 30mm

Back to top Go down
Capala

avatar

Posts : 15
Join date : 2018-02-04
Location : Richmond Texas

PostSubject: Re: Roadmaster/LT1 Accessories - anodized parts, K&N filter, wiring and more   Sun Feb 04, 2018 11:33 am

I will take the WP harness and headlight gap covers.I just sent you and email.
Back to top Go down
SWT SS

avatar

Posts : 54
Join date : 2009-03-23

PostSubject: Re: Roadmaster/LT1 Accessories - anodized parts, K&N filter, wiring and more   Mon Feb 05, 2018 5:55 am

Email Sent
Back to top Go down
Andebe

avatar

Posts : 3146
Join date : 2013-02-20
Age : 49
Location : Marion,NC

PostSubject: Re: Roadmaster/LT1 Accessories - anodized parts, K&N filter, wiring and more   Tue Feb 06, 2018 10:22 am

PM sent.
Back to top Go down
jolo



Posts : 11
Join date : 2018-01-10

PostSubject: Re: Roadmaster/LT1 Accessories - anodized parts, K&N filter, wiring and more   Sat Feb 10, 2018 7:17 pm

Updated with what’s been sold.

I've also added some pictures of imperfections on the used parts. I put a 1/8-inch drill bit on the pieces for reference. These are the nicks and scratches I saw; there may be others I missed, but I've tried to be complete and represent parts accurately.

Used Items

K&N 57-3011 $150
- The prior owner of my wagon installed this and electric fans. I don’t know if this will fit with the mechanical fan in place.
- The filter itself could use a cleaning.


MBA Products black anodized “LT1” resonator plug $25
- This replaces the plastic resonator volume that sits on top of the whole engine with the stock intake in place.


Red anodized crank pulley cover $50
- Has a couple nicks on it
- Likely from MBA products, but I don’t see the marking





Red anodized throttle cable cover $50
- Likely from MBA products, but I don’t see the marking
- Shows some wear





New Items

MBA Products red anodized “LT1” water pump cover $40


MBA Products red anodized AC compressor cover $50


MBA Products red anodized dipstick handle $25


NAPA Mileage Plus 3119 spark plug wire set $25
- Box is open, but looks like they are new


Innovative Wiring Opti Harness $40
- ‘95-’96


Sold Items

Innovative Wiring B-Body Electric Water Pump Harness SOLD

Headlight trim SOLD

Red anodized underhood fuse box SOLD



Red anodized cruise control module cover SOLD




MBA Products red anodized brake master cylinder reservoir SOLD


Energy Suspension 3.5183G sway bar bushings SOLD
Back to top Go down
Capala

avatar

Posts : 15
Join date : 2018-02-04
Location : Richmond Texas

PostSubject: Re: Roadmaster/LT1 Accessories - anodized parts, K&N filter, wiring and more   Wed Feb 14, 2018 6:25 pm

Thanks Jolo for shipping the parts. They came in Monday and they are exactly as described. Excellent transaction!
Back to top Go down
jolo



Posts : 11
Join date : 2018-01-10

PostSubject: Re: Roadmaster/LT1 Accessories - anodized parts, K&N filter, wiring and more   Wed Feb 14, 2018 9:13 pm

Thanks for following up, Capala. The headlight trim seemed delicate, so I'm glad it made it through shipping unscathed.

Let me know if you need anything else!
Back to top Go down
jolo



Posts : 11
Join date : 2018-01-10

PostSubject: Re: Roadmaster/LT1 Accessories - anodized parts, K&N filter, wiring and more   Tue Apr 24, 2018 12:46 am

I still have the following items. Feel free to make some offers!


-----------------------------------

Used Items

K&N 57-3011 $100
- The prior owner of my wagon installed this and electric fans. I don’t know if this will fit with the mechanical fan in place.
- The filter itself could use a cleaning.


MBA Products black anodized “LT1” resonator plug $20
- This replaces the plastic resonator volume that sits on top of the whole engine with the stock intake in place.


Red anodized crank pulley cover $40
- Has a couple nicks on it
- Likely from MBA products, but I don’t see the marking





Red anodized throttle cable cover $40
- Likely from MBA products, but I don’t see the marking
- Shows some wear





New Items

MBA Products red anodized “LT1” water pump cover $30


MBA Products red anodized AC compressor cover $40


MBA Products red anodized dipstick handle $20


NAPA Mileage Plus 3119 spark plug wire set $20
- Box is open, but looks like they are new


Innovative Wiring Opti Harness $30
- ‘95-’96
Back to top Go down
Sponsored content




PostSubject: Re: Roadmaster/LT1 Accessories - anodized parts, K&N filter, wiring and more   

Back to top Go down
 
Roadmaster/LT1 Accessories - anodized parts, K&N filter, wiring and more
Back to top 
Page 1 of 1
 Similar topics
-
» Pinball Parts for sale
» Choice of what parts of forum to show forum widgets
» GTA - New Adoptive Parts looking for milk share!!
» Lee-Enfield treasure trove acquired
» gordon brown is in the $hit parts 4 - infinity........

Permissions in this forum:You cannot reply to topics in this forum
GM Longroof Forum :: The Longroof Marketplace :: Parts For Sale-
Jump to: