HomeHome  PortalPortal  CalendarCalendar  GalleryGallery  FAQFAQ  SearchSearch  RegisterRegister  Log in  

Share | 
 

 Fabrication! do it yourself, post it up!

Go down 
AuthorMessage
Underpowered



Posts : 23
Join date : 2019-02-11

PostSubject: Fabrication! do it yourself, post it up!   Fri Mar 01, 2019 9:11 pm

In my build thread, a few have commented about my willingness to build everything for my car. so, figured i'd post up a thread, to show off both what i have/will build as well as to see what everyone else is building as well. Make it yourself, car related or otherwise, show it off!.

have any questions fab related, i'll do my best to answer them. i don't claim to be an expert, but am well versed i think. I am no master myself, but am never afraid to try to try something new. New skills are never a bad thing, and go in with the mentality of if i screw it up, i can still buy what i need and am only out my time.

So, here are a few things. I have tons of pics of past projects, and will try to post up a few every once in a while and post new ones as i build them. any request for what you guys want to see, i may have built it already. 95% of what i have done and am posting is just for my uses, for fun more or less.

to start, some office products. a few Tape dispensers i have built and given away as gifts over the years







Back to top Go down
occ6.6



Posts : 42
Join date : 2016-01-05

PostSubject: ok ill bite,here is my custom built 4 barrel tbi that is on my 497 inch bb olds in a 71 cutlass.a simallar unit is on a462 bb olds in the wifes 89 caprice   Sat Mar 02, 2019 12:14 am

Back to top Go down
Underpowered



Posts : 23
Join date : 2019-02-11

PostSubject: Re: Fabrication! do it yourself, post it up!   Sun Mar 03, 2019 5:15 pm

interesting.  TBI is not common to mess with.  


a few more today.....wagons of a different sort.

single piece tube frame.  one cut,  at the X simple because it is the only way.



made a bomber style seat for it as well


next to another one,  my Brother made most of it,  but i did play a little role.


latest one,  made for a Friends first child




Back to top Go down
Underpowered



Posts : 23
Join date : 2019-02-11

PostSubject: Re: Fabrication! do it yourself, post it up!   Sun Mar 03, 2019 5:16 pm

and start of my latest,  for my own personal uses so it is going all out.  Custom made Beam style front axle



Back to top Go down
JeffY

JeffY

Posts : 90
Join date : 2018-10-04
Age : 38
Location : Columbia MO

PostSubject: Re: Fabrication! do it yourself, post it up!   Thu Mar 07, 2019 7:33 am

Good job Bro!
Back to top Go down
Underpowered



Posts : 23
Join date : 2019-02-11

PostSubject: Re: Fabrication! do it yourself, post it up!   Thu Mar 07, 2019 9:46 am

My project before my wagon. sadly, it was parted out to fund the wagon project. started life as a bone stock 1989 V10 blazer (more commonly known as a K5) gm dropped the K and C for their trucks and reffered to them as V and R series in the later 80's but it is not nearly as common of a term as the C and K series is to hear and has become pretty well universal for them. Then, out came the sawzall, grinder, welder, and tube bender








It made it into Fourhweeler Mag at one point as well. Prior to the Fron suspension re-work and entire Cage redesign.
Back to top Go down
Sponsored content




PostSubject: Re: Fabrication! do it yourself, post it up!   

Back to top Go down
 
Fabrication! do it yourself, post it up!
Back to top 
Page 1 of 1
 Similar topics
-
» Putting an image in your post
» Why it's NOT a crime to post an offensive message on Twitter: DPP backs free speech and clears Tom Daley 'troll'
» Who voted on my post
» Can't post a topic.
» First Post!

Permissions in this forum:You cannot reply to topics in this forum
GM Longroof Forum :: The Longroof Lounge :: Pics and Video-
Jump to: