GM Longroof Forum
Would you like to react to this message? Create an account in a few clicks or log in to continue.



 
HomeHome  PortalPortal  GalleryGallery  Latest imagesLatest images  SearchSearch  RegisterRegister  Log in  

 

 Wagon Cat back 2.5" mandrel bent system.

Go down 
+2
bcreasy
BigBlackBeaSSt
6 posters
AuthorMessage
BigBlackBeaSSt

BigBlackBeaSSt


Posts : 4560
Join date : 2009-08-01
Age : 58
Location : Sanford, NC

Wagon Cat back 2.5" mandrel bent system. Empty
PostSubject: Wagon Cat back 2.5" mandrel bent system.   Wagon Cat back 2.5" mandrel bent system. Icon_minitimeSat Apr 14, 2012 6:40 pm

I had this system on my wagon. It exits exactly like the stock sedan system does, under the rear bumper at the corners. It is used but in very good condition. Everything is 2.5" Mandrel bent tubing. It was originally a new sedan cat back system and I had the tail pipes re-made for the wagon. The tails were all hand welded elbows and straights, so there was no bending. No issues. I did not use traditional pipe clamps so EVERYTHING slid apart with not problems. I will include NEW 2.5" clamps that originally came with the kit. The entire system uses the stock hangers on the Roadmaster or Caprice wagon. Should bolt directly to your stock cats.

$350 plus shipping

These pictures were when it was new.

Wagon Cat back 2.5" mandrel bent system. P4150642

Wagon Cat back 2.5" mandrel bent system. P4150638

Wagon Cat back 2.5" mandrel bent system. P4150637

Wagon Cat back 2.5" mandrel bent system. P4150636

Wagon Cat back 2.5" mandrel bent system. P4150635

Wagon Cat back 2.5" mandrel bent system. P4150634

Wagon Cat back 2.5" mandrel bent system. P4150633

Wagon Cat back 2.5" mandrel bent system. P4150630

Pictures after removal.

Wagon Cat back 2.5" mandrel bent system. P4140377

NOTE: Doug Thorley included an extra pipe. Not sure but this may have been to accommodate a D body car.















Last edited by BigBlackBeaSSt on Sat Apr 14, 2012 8:02 pm; edited 1 time in total
Back to top Go down
bcreasy

bcreasy


Posts : 84
Join date : 2011-05-14
Location : Indaina

Wagon Cat back 2.5" mandrel bent system. Empty
PostSubject: Re: Wagon Cat back 2.5" mandrel bent system.   Wagon Cat back 2.5" mandrel bent system. Icon_minitimeSat Apr 14, 2012 7:34 pm

I can't tell is there a X pipe in it?
Back to top Go down
BigBlackBeaSSt

BigBlackBeaSSt


Posts : 4560
Join date : 2009-08-01
Age : 58
Location : Sanford, NC

Wagon Cat back 2.5" mandrel bent system. Empty
PostSubject: Re: Wagon Cat back 2.5" mandrel bent system.   Wagon Cat back 2.5" mandrel bent system. Icon_minitimeSat Apr 14, 2012 7:41 pm

No X pipe
Back to top Go down
Krzdimond
Admin
Krzdimond


Posts : 3412
Join date : 2008-11-04
Age : 57
Location : Savannah, GA

Wagon Cat back 2.5" mandrel bent system. Empty
PostSubject: Re: Wagon Cat back 2.5" mandrel bent system.   Wagon Cat back 2.5" mandrel bent system. Icon_minitimeSat Apr 14, 2012 7:45 pm

stock connections for the cats?
Back to top Go down
BigBlackBeaSSt

BigBlackBeaSSt


Posts : 4560
Join date : 2009-08-01
Age : 58
Location : Sanford, NC

Wagon Cat back 2.5" mandrel bent system. Empty
PostSubject: Re: Wagon Cat back 2.5" mandrel bent system.   Wagon Cat back 2.5" mandrel bent system. Icon_minitimeSat Apr 14, 2012 7:58 pm

Krzdimond wrote:
stock connections for the cats?

Yessir........ I had the system on when I was at your place. The pipes that I had on the roof rack were just temporarily installed today. To be welded up on Monday.
Back to top Go down
BigBlackBeaSSt

BigBlackBeaSSt


Posts : 4560
Join date : 2009-08-01
Age : 58
Location : Sanford, NC

Wagon Cat back 2.5" mandrel bent system. Empty
PostSubject: Re: Wagon Cat back 2.5" mandrel bent system.   Wagon Cat back 2.5" mandrel bent system. Icon_minitimeSun Apr 15, 2012 3:19 pm

Sold and picked up.
Back to top Go down
jimbeau




Posts : 1181
Join date : 2010-06-25
Location : Detroit

Wagon Cat back 2.5" mandrel bent system. Empty
PostSubject: Re: Wagon Cat back 2.5" mandrel bent system.   Wagon Cat back 2.5" mandrel bent system. Icon_minitimeMon Apr 16, 2012 4:05 am

Glad to see these going to a good home.
Back to top Go down
jimbeau




Posts : 1181
Join date : 2010-06-25
Location : Detroit

Wagon Cat back 2.5" mandrel bent system. Empty
PostSubject: Re: Wagon Cat back 2.5" mandrel bent system.   Wagon Cat back 2.5" mandrel bent system. Icon_minitimeMon Aug 13, 2012 12:36 am

If you plan on going east through the Detroit area any time in the future, John, save those stock pipes and I'll buy them from you.
Back to top Go down
94 Roadmaster Wagon

94 Roadmaster Wagon


Posts : 61
Join date : 2012-08-12
Age : 61
Location : Monroe Center, IL

Wagon Cat back 2.5" mandrel bent system. Empty
PostSubject: Re: Wagon Cat back 2.5" mandrel bent system.   Wagon Cat back 2.5" mandrel bent system. Icon_minitimeMon Aug 13, 2012 12:33 pm

jimbeau wrote:
If you plan on going east through the Detroit area any time in the future, John, save those stock pipes and I'll buy them from you.

Not planning on it, but I'll save them, if I can. The body of the car is rust free, but the bottom side (save the floorpans, and sheet metal) are pretty rusty. My guess is that the car was stored in a gravel-floored building, and the humidity came up. I know first hand about that, as I used to have a pole barn, with part of it having a gravel floor (where I stored stuff). After seeing the rust on my snowmobile trailer, I was able to obtain a huge sheet of plastic, two mills thick, and put that down. The rust stopped after that. Anyway, off subject here, but the frame, and exhaust etc. is pretty rusty. The exhaust isn't making noise or anything, and everything seems OK. What exactly are you interested in? The whole cat-back system? Or just the resonators?

John
[b]
Back to top Go down
http://www.lubedealer.com/nielsen
jimbeau




Posts : 1181
Join date : 2010-06-25
Location : Detroit

Wagon Cat back 2.5" mandrel bent system. Empty
PostSubject: Re: Wagon Cat back 2.5" mandrel bent system.   Wagon Cat back 2.5" mandrel bent system. Icon_minitimeMon Aug 13, 2012 12:51 pm

Whole cat-back. I can't imagine being able to get any replacement pipe of equal quality without paying through the nose.
Back to top Go down
JaySS
Admin
JaySS


Posts : 427
Join date : 2009-01-06

Wagon Cat back 2.5" mandrel bent system. Empty
PostSubject: Re: Wagon Cat back 2.5" mandrel bent system.   Wagon Cat back 2.5" mandrel bent system. Icon_minitimeMon Aug 20, 2012 10:59 am

Topic split to ensure hitch information stays available.

New thread in Transmission and Towing:

https://gmlongroof.4umer.com/t6972-class-iii-hitch-discussion

- J
Back to top Go down
Sponsored content





Wagon Cat back 2.5" mandrel bent system. Empty
PostSubject: Re: Wagon Cat back 2.5" mandrel bent system.   Wagon Cat back 2.5" mandrel bent system. Icon_minitime

Back to top Go down
 
Wagon Cat back 2.5" mandrel bent system.
Back to top 
Page 1 of 1
 Similar topics
-
» Back with a Wagon
» Back in a Wagon :)
» Will a Sedan cat back fit a Wagon ?
» Back in the Wagon Game!
» Back in the game! Got a wagon :)

Permissions in this forum:You cannot reply to topics in this forum
GM Longroof Forum :: The Longroof Marketplace :: Parts For Sale-
Jump to: