Disconnecting pcm.

Ok, I've tried the search function, google, and youtube with no luck. How the heck do I unplug the connectors from the pcm for my 94 lt1? I don't want to break them.

There is a locking tab on each connector. It is usually a different color than the connector. You have to remove them, before pulling the connector off.

Awesome, thanks for the reply. I see red tabs on each connector which I assume are the locking tabs. Since this is 20 year old plastic and I don't want to break it, should I just try sliding them back? Lifting the tabs? I don't want to force anything the wrong way and break it.

They should come out rather easily. A screwdriver is the usual tool. There may be a thumb latch or a latch that can be lifted with a screwdriver at the same spot. The tabs are usually pliable enough that you will not break them easily.

Yes like said above they are plastic folk like things that just hold the plug from vibrating out. Wiggle on then gently with a small screw driver and one will loosen up and be real self explanatory.
Don't try to force the plug "out" until you remove these clips. Most likely have to pry up a little on the clips..

Thanks guys.