Cruiser Parts

Anyone need anything from a 1992 Custom Cruiser? It is White with Blue Leather. The interior is damn near perfect except the usual jackhole came along and tore up the door handle inserts. Someone thought they would be slick and lock all the doors but I broke into it by breaking a door handle. The body is in good shape save for a dent and poor repair in the passenger wuarter rear door. It has a vista shade but one of the clips on it is broken. No Cargo shade and I took the door weatherstriping.

The grille has been torn off and the hood ornament is on it but one corner is broken. All cladding is still on the car and most of it is in perfect condition. Pass front door one is busted and the rear door wuarter one is there but cracked. Driver side ones are all there and looked great. Both bumper covers are cracked up and the rear is beyond saving. Headliner is ALMOST flawless and the lower portion of the rear seat is gone.

For those interested the wagon has a 350 and was built in March of 1992. It was in service for 251,xxx miles.

When I got into the car I was sad about just how easy it is to break into one of these cars. All you need is a screwdriver

EDIT: Upon reading this it would seem that I broke into a random car but the wagon is at Pull A Part in Louisville Kentucky.

grab everything that is olds specific, you'll be able to sell it.
tail lights, front bumper, cladding, etc etc.

myself, I need the custom cruiser script for one side but toying with the idea of using the boxy script pair that I do have....

specially the 92 as only 4K were made....

Interested in the third brake light assembly, handle the whole bit. Rear glass hinges. And if alloy wheels, the center caps.

I would be interested in the HVAC unit if it is not too expensive. DS tail light, the medalion on the grille (if the grille is broken).

DBeaSSt wrote:

Interested in the third brake light assembly, handle the whole bit. Rear glass hinges. And if alloy wheels, the center caps.

The hinge pins can be pressed/drifted out (use a drift from the end that is recessed), and you can use just the window part rather than remove the whole hinge, and do them one at a time. If the cntr brake light/striker assembly is not available, I have a complete one in blue.

It has a complete third brake light in perfect condition. The wheels are gone but a couple of center caps are inside of it. Hinges are on it but kinda beat up from people prying on them in an attempt to get in the car.

HVAC controls are complete, can grab them as well.

Gonna go ahead and grab the cladding from it and tails. The grille has been forcibly removed already

As for prices on the items. Most everything there is pretty cheap.

http://www.pullapart.com/pricing/Main.aspx?letter=&loc=8&#pricelist

If the link doesn't go right to it select Louisville from the pulldown list to see what the parts cost me. I'll sell the parts for a couple bucks over what I pay.

! Man, if the taillights are there...I will take both of them. Wish I back home to see the poor thing @ PaP.

Chris

The tailights are there and complete. Going back to grab them today if the rain stops so I can take the front seats.

Heading out there on Saturday to grab this tsuff and check out the 94 Caprice they just got. Hope it's a wagon.

I had the AC controls out and when I was removing the cable I broke the clip off, sorry

I grabbed the tails for you Chris (since you wanted both)

Here is a pic of them and the Wiper Motor. The lens are a little foggy in places but should polish right up. There are NO breaks or chips anywhere. They look damn good to me. The one has some slight scratches as seen in the pic but not deep.



Here is the Brake light and Hinges for Mike. The hinges have a couple chips in one but are useable and the light has some fading on top from the sun but is not flaky or anything like that.

Those light will be perfect (same with the wiper motor) Thank you so much!! Your check is going out 1st thing in the morning!

Chris

Cool, thanks.

I was skeptical that the lights were in fact different between makes. That was quickly squashed when I put these lights against my Caprice, lol.

I really only want the right side buttons from the HVAC module. I assume it is the automatic unit.

Did you grab the instrument cluster? It is extremely rare. Get the horn buttons too.

It is not an electric unit, looks just like the one in the LTZ Caprice next to it. Steering column and wheel is long gone. Thought about grabbing the cluster but didn't, I don't have much money for unneeded parts sadly.

94Woody wrote:

Cool, thanks.

I was skeptical that the lights were in fact different between makes. That was quickly squashed when I put these lights against my Caprice, lol.

The lights are different between makes. the Caprice lower apron is 1/2 inch shorter than the OCC, and the RMW is 1/2 inch shorter than the Caprice.

if you come across a grey driver's side front door armrest in your travels please get it and let me know!

I may have one already. I'll check the stash and let you know.

Thanks! if you have one, let me know how much!

I only have a blue passenger side one. Unless the yards get some new B Bodies in soon I won't be able to find one at the moment.

Amazingly they are getting more scarce in the yards around here.

I'm looking for a set of front door hinges for my caprice wagon. The rollers must be mint as my doors squeek and it drives me nuts!

Prefer white as well, but if they are in terrific shape I will paint them if need be

Do you want just the lowers or both lower and upper? I'm going to the yard on Sat and can grab them. There are a few B's I can get them from but I believe these white ones are in great shape.

This particular OCC is reaching the time limit to be on the yard and should be crushed soon. Anyone is needing anything from it let me know.

how much if I take the uppers and lowers? The door hinge are the same for the OCC and the caprice correct? Please let me know and thanks.

DJ
dcsulli7307@yahoo.com

They will cost me about $7 each, so $10 each would be fine. They are the same hinges.

That Cruiser has a blue interior right? How's the condition of the air bag and steering wheel? Leather?

94Woody wrote:

They will cost me about $7 each, so $10 each would be fine. They are the same hinges.

so $20.00 for top and bottom hinges of both front doors?

10 for 1, 20 for 2, 30 for 3, 40 for 4. Plus shipping.

Mike--It has a blue interior but the column and wheel are long gone.

Ok i'll take the lower hinges for both front doors.(that have the rollers and springs), PLEASE remember they need to be in great shape with the rollers being a huge part of the not squeeking or rusted.Sorry if i repeat myself.

THANK YOU!!!!!!!!!!!!!!!

any luck on the hinges?????

Won't hit the yard until Tuesday morning.

94Woody wrote:

Won't hit the yard until Tuesday morning.

no problem thought you were going Sat. my bad. Please keep me posted either way and thanks again

I had planned on it, but you know what normally happens to plans, lol.

Not a single hinge there is worth squat. Busted rollers galore. They have crushed all the nice cars and only a few turd piles remain

94Woody wrote:

Not a single hinge there is worth squat. Busted rollers galore. They have crushed all the nice cars and only a few turd piles remain

ok thanks anyways. Do you by any chance have a 3rd brake light for sale?

Sold the one that I had.

I have a couple of 3rd brake lights. What color are you interested in?

Fred Kiehl wrote:

I have a couple of 3rd brake lights. What color are you interested in?

I'm on the one that screwed mine up modding it Fred how much?Thanks.

Do you have any mint lower door hinges for fronts as well?I need more wagon parts email me if interested.

dcsulli7307@yahoo.com

^ Would Fleetwood hinges work, or are they different in some way?

Stingroo wrote:

^ Would Fleetwood hinges work, or are they different in some way?

not sure i'll have to check.The rollers in mine squeek and need replaced. Unfortunately they dont make replacements and the whole hinge needs replaced.

If you can find out, let me know I'll pull mine. Confirmed, they don't squeak

Fleetwood front doors are the same as their B-body bretheren so the hinges will work. The back doors are different, however, the hinges may be the same, not really sure there.

Yeah, the back doors are longer, so they might have a different hinge (a quick comparison with my wagon will figure that one out when I get home, however, d'oh!).

I can definitely pull those fronts for you though sometime next week (I've got a busy week ahead, but I promise I'll get to it )!

OK everybody.

Just saw that the yard got a 91 OCC yesterday. Heading up there as soon as I can to check it out.

Nevermind, the 91 is a junker.

94Woody wrote:

OK everybody.

Just saw that the yard got a 91 OCC yesterday. Heading up there as soon as I can to check it out.

Nevermind, the 91 is a junker.

Any good parts? What color is the interior?

It is blue on blue, wrecked on the pass front so the hood, grille, bumper, etc is trashed. Windows are busted out on pass side and the interior is nasty. Door panels busted up, steering wheel has fell apart, cargo panels scratched and stained.

The cluster is there, pass tail light is complete but sun faded. Pass door fly away panel is still on it. Few good pieces of cladding. Aside from that, not much.

Is the lens faded or the bezel? If the bezel is the part that is faded, I am interested in the passenger side tail light if it is reasonable. I am going to paint the bezel anyway. If the tailgate window is closed, you can break the lock bezel and remove the lock fairly easily. then open the window with a thin screwdriver. If it has the electronic HVAC, I would be interested in the OFF button if it is not broken, and the electronic fan speed control (two connector version). Are the pointers on the instrument cluster faded? If not, check on the price, and if it is fairly cheap, I may be interested in that too (with the pigtails).

The lens is faded. I'll check the other parts tomorrow and let you know. Small parts like that shouldn't cost me much at all. BIg parts to at times, I bought the C pillar trim from a 91 a couple weeks ago. The big long one with sill panels attached. They charged me $4 for a couple feet of moulding, lol.

Still looking for the "Custom Cruiser" side script.... LMK if you get one. I have one side, missing the other, thanks.

I have one full side, CRUISER from the other, and Oldsmobile from the gate. If you want all of them $13 shipped.