96 Buick RMW for parts in WV

I have a complete 96 RMW for parts, I'm keeping the motor/transmission & ecu wiring, anything else is for sale. I'd prefer any larger items to be picked up in the Charleston WV area, I'm willing to travel about an hour away to meet anyone. I'm willing to ship the smaller items at the buyers expense. some interior pieces are not usable as this car had 190K on the odometer.

Good luck selling the parts and thanks for thinking of us on the forum!! Parts are getting harder and harder to get.

If you could post a few pictures that would be helpful, as sometimes color and condition are important.

Welcome aboard and thanks

Tom

until I can get the pics up here,

the exterior is white & woodgrain, interior is tan (leather maybe), it has the tow package, moonroof & roof rack, all glass is good, doors & tailgate are good (no rust that I saw), rear fold down seat looks like new, it has all 5 aluminum wheels (spare tire & wheel look brand new), both front seat appear to be 8 or 10 way power adjustable (seats are bad, but power part works), front & rear wipers work, rear window release works, am/fm cassette & cd works, digital climate control works.....

probably alot of other small parts that are good & usable for someone.......

I'm not wanting to get rich, as I don't have alot invested in it, probably could get my money back by crushing it, after I remove the parts I want..

I'll try to get my pics posted tomorrow

Hi,

I'm looking for a rear wiper arm. Do you have one on the car?

Thanks.

Kerry.

Kerry,

I know there is one on the car, I tested the motor from inside & saw it moving in the rearview mirror, I'll check the condition of it this evening.

I would appreciate that, and thanks for the fast response.

Kerry.

What's the condition of the stainless trim around the car below the woodgrain? I'm looking for ding-free ones - don't care about the black rubber on it.

Do the front seats have lumbar and/or heat switches on the sides?

Might also be interested in the upper narrow trim at the top of the woodgrain.

Also looking for the tan trim piece that covers the rear wiper motor area and the colored screws for it.

And the grill. Don't care about the chrome condition as I'm painting it, just want a non-broken one.

And the hood ornament lol.

Willing to drive to meet as I'm in Charlotte, NC.

heavywoody,

I sent you a PM

Please send me a PM. I've got a local contact in Charleston that could meet you.

Would be interested in the rear bumper cover...would have to ship to 98577 (SW Washington state). Wish I were closer...

How much for both front doors

WVHillBilly, great to meet you, and thanks for the tour of your shop. Those G-bodies are impressive!

looking for a steering wheel and the trim pieces behind the rear doors.

also looking for plastic instrument cover that covers speedometer and plastic trim that covers rear handle light by tailgate

please lmk

mountieuk, I sent you a pm

Hi, do you have a battery tray?

Thanks

Cletus3x, the battery tray was rusted bad

How about a cruise control to throttle body cable?

booster, I'm saving it for my upcoming engine/trans swap in my project

WVHillbilly wrote:

Cletus3x, the battery tray was rusted bad

Seems to be a common theme! Thanks though.

Do you have either of the white plastic third row interior lamp covers?

Know this is an old thread but I'm looking for rust free inner fender driver side would possibly buy both .I'm in Columbia Station Ohio about 3 hours from you .

Wojtek, the inner fenders are rusty

VvvCould I purchase the portion of drivers side front seat belt that comes up through the front seat and bolts to the floor behind the drivers seat? I got one out of a Cadillac at the junkyard but it’s a little short and difficult to clip in. It’s probably around 10” long and has the belt receiver on it. I’ll pay up to $40 for it. Thanks

Tan drivers door inner panel ?

My interior is tan but I only need the seatbelt

I'm looking for a driver side outside mirror. White would do the trick, but color doesn't matter. Let me know what you might still have! Thanks for any reply.

Do you still have this? Is the hitch a full size 2" class three?

TheDudeAbides wrote:

Do you still have this? Is the hitch a full size 2" class three?

Notice the name of the original poster says "Guest"? That means they are no longer a member here so don't expect any answer from them.

HOWDY YALL'S

I reside in the Eastern Panhandle near Martinsburg,WV
trying the make a 1993 Buick RMW roadworthy....
Need the high mount brake light with the attaching lift
handle and the license plate lamps/lens and connectors
if possible.... they are L & R oriented....
Are you able to help me out ????

THANKX

DAVID R