Help! Need 1990 Custom Cruiser Headliner Clips

Does anyone have any of these or know where to get them? They keep breaking as we pull the headliner!

Give me a few days to get back into the archives, and I may have a few.
I haven't had a box body in a few years, but I usually buy more than I need on stuff like this, and I have had a few h/liners replaced.
There is a tool you can buy/fabricate that you slide in from the inside and it compresses the clip tangs that allow you to remove the clips with listening to them scream as you break them during removal.

I had to search online for the part #, and ended up with 3 @$20 a piece. 1 of those is only found in 1 position, too. You should be able to fins the part # on the clip, then googley search it. There was no dealer stock. Comb through pages and pages of search resulta to find them. I thought about 3D printing them, but I think GM wouldn't like that.

Try this guy an old school hot rodder he is at a lot of swap meets in the area and seems to have a lot of stuff or at least where to find it , a part number will help . Just Clips Ken 440 225 0371 www.justclips.com . Another source I have used is Clipsandfastners.com 714 6662959 they are a specialty house that carries stuff for almost all automakers . Hope this helps !

Thanks for all the replies. We were able to get it together only breaking the two. I was able to JB Weld them but only one of the two survived reentry. The three remaining on the passenger side cargo compartment roof molding were able to support the headliner with the back pillar and lock pillar's help.