Wanted: 94 Roadmaster radio mounts

Wanted: the two mounts that attach the sides of the 94 Roadmaster 1.5 DIN radio to the dashboard.

I was confused by the useless directions from Scorche, and I cut off the little tabs that insert into the sides of the radio. Now the radio is only held on by a single screw on each side, and it rotates.

There is a plastic tray which mounts to the bottom of the radio. Then there are three screws which mount it to the dash. If this sounds like the part, it is the same one in all 91-93 cars. 94s may be the same. I can get one for you, but I do not know the price or shipping. I would guess $18 shipped. I will ge at the JY on Tuesday.

If the 94 is different, I do not know if there is one available.

The metal clips with the stud in them, are also the same on all radios. I have some of those. If you need 2 I can send them to you for $7 shipped. You can also get them at an audio shop for a lot less.

91-93 use a different mounting bracket than 94+. At least for the Caprice. Pretty sure the Roadmaster uses the same thou. I had this issue installing a 94 radio in my 93.

So, What do you want, a 91-93 or a 94 mount (if it is different)? Can you post a pic of what you want?

Fred Kiehl wrote:

So, What do you want, a 91-93 or a 94 mount (if it is different)? Can you post a pic of what you want?

I don't need either. I was just mentioning to Nick that the 91-93 is different than the 94 mount.

It looks like 1994 is unique. 91-93 is different, and so is 95-96.

I need the mounting brackets on the right and left of the 1994 Roadmaster radio.

There are a couple of 94 Caprices here. I'll check the yard.

No luck. There were no Caprice radios, but it didn't look like they would fit anyway.

i,m confused,. if you cut the tabs off the radio,. then you need another radio,.??

Nick

There are two plastic L-shaped brackets that screw onto the side of the radio. There are also plastic tabs that keep the radio from rotating, because there is only one screw on each side. The other side of the L screws onto the dash.

I got frustrated with the instructions with the adapter kit, and I cut off the tabs from the factory parts to make it fit. Then I realized how the adapter kit was supposed to work, and I need the tabs.

The pictures show the radios with the brackets already screwed onto them.

Still looking for these? I'll be heading back to the JY in about 2 weeks, there was a '94 roadmaster there with the radio still in it, if its there when I go back I'll pull them