| | quick question! |  |
|
|
| Author | Message |
|---|
benn
Posts : 557
Join date : 2011-12-22
Location : Ontario, Canada
| Subject: quick question!  Thu May 22, 2014 1:42 pm | |
| Do you NEED to remove the wiper motor for clearance to remove the engine in my '92? Can't get the wiper arm off to access the under cowl portion. Thanks!  | |
|
| | |
mtrhead79
Posts : 1614
Join date : 2010-04-24
Age : 56
Location : phila. pa
| | Subject: Re: quick question! Thu May 22, 2014 5:53 pm | |
| cant say for sure i would think it could stay on my 94 lt1 i left it behind and it was no issue at all | |
|
| | |
lakeffect
Posts : 3892
Join date : 2009-08-18
Location : Rochester NY 14621
| | Subject: Re: quick question! Thu May 22, 2014 7:24 pm | |
| I had to do so when I pulled the 350 from Shammoo.
Three bolts, 10mm
Dave | |
|
| | |
benn
Posts : 557
Join date : 2011-12-22
Location : Ontario, Canada
| | Subject: Re: quick question! Thu May 22, 2014 9:08 pm | |
| alright thanks! i cant get the wiper arm off though to remove the plastic cowl cover to get at the linkages underneath. pita! | |
|
| | |
Fred Kiehl
Posts : 7291
Join date : 2009-11-13
Age : 76
Location : Largo, FL 33774
| | Subject: Re: quick question! Thu May 22, 2014 10:09 pm | |
| You should not have to remove the wiper motor to remove the engine.
If you insist on removing the wiper arm, (I assume you have the nut off) you lift the arm slightly, and insert a drill or nail in the hole on the side of the arm to lock it in the arm In the up position. Then you can wiggle the wiper arm and remove it from the tapered shaft. | |
|
| | |
jayoldschool
Posts : 2728
Join date : 2009-06-14
| | Subject: Re: quick question! Thu May 22, 2014 10:28 pm | |
| Canadian Tire has the tool to remove wiper arms. It's cheap. | |
|
| | |
Guest
Guest
| | Subject: Re: quick question! Fri May 23, 2014 10:01 am | |
| |
|
| | |
benn
Posts : 557
Join date : 2011-12-22
Location : Ontario, Canada
| | Subject: Re: quick question! Fri May 23, 2014 10:35 am | |
| yea, tried a few tricks. its seized on there pretty good. friggin Canada man... | |
|
| | |
Cadet57
Posts : 3047
Join date : 2010-04-13
Age : 37
Location : Chicopee, MA
| | Subject: Re: quick question! Fri May 23, 2014 11:24 am | |
| | |
|
| | |
jayoldschool
Posts : 2728
Join date : 2009-06-14
| | Subject: Re: quick question! Fri May 23, 2014 2:15 pm | |
| | |
|
| | |
phantom 309
Posts : 5848
Join date : 2008-12-28
Age : 114
| | Subject: Re: quick question! Fri May 23, 2014 9:04 pm | |
| | |
|
| | |
benn
Posts : 557
Join date : 2011-12-22
Location : Ontario, Canada
| | Subject: Re: quick question! Sun May 25, 2014 10:09 pm | |
| | |
|
| | |
lakeffect
Posts : 3892
Join date : 2009-08-18
Location : Rochester NY 14621
| | Subject: Re: quick question! Mon May 26, 2014 7:29 am | |
| Early news reports said it all started with a simple car repair that got progressively out of hand.[You must be registered and logged in to see this image.] | |
|
| | |
Sponsored content
| | Subject: Re: quick question! | |
| |
|
| | |
| | quick question! | |
|
