95 woody Caprice part out

I'm going to start parting this new-to-me one owner wagon out soon, no engine or trans. It has a blue power cloth interior thats very dirty. I'm keeping the posi axle and probably a few small parts, the rest is up for grabs. I'll get more pics of it later this weekend.

Crap I thought it was a Roadmaster when you posted it on FB. Hows the doors and the rocker trim?

1993 Roady-man wrote:

Crap I thought it was a Roadmaster when you posted it on FB. Hows the doors and the rocker trim?

Passenger side looked good, forgot to look at the other side. The front and rear passenger doors look ok, the driver's ones have dents.

And now some pictures. I don't know how well the interior will clean up, this thing smells bad and mice have been everywhere in this car. There's also burn marks in the front seats. The rear seat looks brand new though.

By the dirt marks on the rear seat, I would say that it spent it's whole life as a pick-up.

Agree with you Robert.Looks like it was used and abused and saw no care at all.Strange how the
drivers quarter is completely rusted out while the passengers side still looks pretty good.Looks
like a lot of good parts still to be had though.
Jim

If you aren't going to keep the tails, I'd be interested to have a second set. (I have OCC and RMW spares, but no Caprice (and I own two of them!). Also the rear wiper if you can get it off in one piece

To me it looks like this thing was driven off the dealer's lot and directly onto a farm where it was never washed or cleaned, EVER. The back seats were defintily never used, the tail gate carpet is worn down to almost nothing. I found the storage box in the back was filled with vintage wet phone books! The 3rd foot well was mostly a mouse nest with a sack of quarters and 2 sets of jumper cables


Sprocket, I'll take a look at the rear lights this week, I think the DS one was scraped.

How many quarters and what are the dates?
Jim

Can't figure out how to put pidtures on here. I am trying to find the third hight mount brake light connector which is in the tail gate door to the left of the lock reciever. It has two(neg/pos)spring loaded conntacts the connect with the high mount light when the glass lift is closed. It is rivited.

If Sprocket hasn't already claimed it, how much for the passenger tail shipped to 20905? Only interested if its in decent shape (no cracks, scratches ok).

are the rear corner chrome trim pieces the same as a roadmaster's?

Can you grab the right rear wheel trim?

Guinness wrote:

Can't figure out how to put pidtures on here. I am trying to find the third hight mount brake light connector which is in the tail gate door to the left of the lock reciever. It has two(neg/pos)spring loaded conntacts the connect with the high mount light when the glass lift is closed. It is rivited.

I'll have to check the part out, the brake light was rotted out, have to make sure its not damaged as well.

92cappy wrote:

If Sprocket hasn't already claimed it, how much for the passenger tail shipped to 20905? Only interested if its in decent shape (no cracks, scratches ok).

I'll get back to you, waiting on Sprocket.

benn wrote:

are the rear corner chrome trim pieces the same as a roadmaster's?

Nope, very different.

jayoldschool wrote:

Can you grab the right rear wheel trim?

Might be sold already, I'll let you know.

95BRMW wrote:

I'll get back to you, waiting on Sprocket

Cool take your time. I got all the time in the world just waiting til speing when I can drive again

I want to get this thing out of here soon, here's some prices on parts. The following are pickup only.

Hatch glass with defrost-$25
Front bumper-$20
blue column with key wheel and air bag-$40
Power seats-$20 each. Dirty but might clean up
Fuel tank with filler neck-$25
Doors without panels-$20 each


The rest:
Headlights-$40 shipped for the pair
front or rear wiper motor-$35 shipped
cruise box-$25 shipped

If you don't like a price, shoot me an offer

hi david i am looking for dr side rocker trim the little pc just in front of rear wheel only want it if no rot or dingers. my trim rotted where it bolts on . here is pic





thanks john

what class is that trailer hitch?

Receiver size looks like a 3 to me...

jayoldschool wrote:

Receiver size looks like a 3 to me...

thats what I was thinking too

mtrhead79 wrote:

hi david i am looking for dr side rocker trim the little pc just in front of rear wheel only want it if no rot or dingers. my trim rotted where it bolts on . here is pic





thanks john

If its intact just pay shipping and its yours. Hope to get there this week and fill some parts requests!

buickestate wrote:

jayoldschool wrote:

Receiver size looks like a 3 to me...

thats what I was thinking too

It's a 2" hitch riddled with holes on the left side. Didn't think a hitch could rust out that bad. I was kind of annoyed about that, the hitch was one of the parts I really wanted for my Caprice.

Can't figure out how to put a photo on here. I am trying to find a wagon gate striker with third light contact insert, the part with the two spring loaded conntacts for the high mount light. It is in the door left of the lock striker.

Guinness wrote:

Can't figure out how to put a photo on here. I am trying to find a wagon gate striker with third light contact insert, the part with the two spring loaded conntacts for the high mount light. It is in the door left of the lock striker.

going there tonight to pull some parts, I'll pull that out if its usable.

thanks david. guinnes to post pics you need to get a account at snapfish or tinypic.com. i have one at tinypic.com but there are a bunch of places. the accounts are free and you store your pics there then you use them to post pics on websites. i am not real good with computer but its not to hard . i will see if there is a link how to do it . the impalassforum had a link to do it

https://www.youtube.com/watch?v=VFwDLXeYJFM&feature=related
you tub video of tiny pic use

http://www.impalassforum.com/vBulletin/showthread.php?t=249018&highlight=post+pictures
link to impalass forum on posting pics hope this helps

95BRMW wrote:

Guinness wrote:

Can't figure out how to put a photo on here. I am trying to find a wagon gate striker with third light contact insert, the part with the two spring loaded conntacts for the high mount light. It is in the door left of the lock striker.

going there tonight to pull some parts, I'll pull that out if its usable.

Take a cordless drill. You need to drill out rivets.

jayoldschool wrote:

95BRMW wrote:

Guinness wrote:

Can't figure out how to put a photo on here. I am trying to find a wagon gate striker with third light contact insert, the part with the two spring loaded conntacts for the high mount light. It is in the door left of the lock striker.

going there tonight to pull some parts, I'll pull that out if its usable.

Take a cordless drill. You need to drill out rivets.

Already packed it and a cordless sawzall

PM sent!!

Tom

hey david did you get a chance to get parts just checking thanks john

hey david did you get a chance to get part just checking thanks tom.

Not yet, I plan to get over there this weekend.

ok. you might want to bring some pb blaster the screws on the trim are tough to get out. when i did mine i used a short screw driver and a big adj wrench on it to get screws loose

David, looking for a passenger rear wing window - intact. Let me know if you have one & the price/shipping

-Mike

David, please do not let that drive-shaft spline/yoke go to the scrap yard. I would love to have an extra to keep fluid from running out of the t-56 when I remove the drive-shaft.

Tim

TeresaLynne wrote:

David, looking for a passenger rear wing window - intact. Let me know if you have one & the price/shipping

-Mike

I'm keeping the windows, needed them for my RMW.

BigBlackBeaSSt wrote:

David, please do not let that drive-shaft spline/yoke go to the scrap yard. I would love to have an extra to keep fluid from running out of the t-56 when I remove the drive-shaft.

Tim

Funny thing is I was thinking the same thing today when I was doing a tranny swap in the Caddy. I'll save it.

hey im interested in the wood grain on the doors interior around the window switches ect. will the fit my 92 roadmaster my interior pieces are all blue and i want to replace them with the grain thanks

David, I'm interested in the column. Could I convince you to ship it if you remove the steering wheel & air bag? Don't need those.
If you pull out the turn signal stalk (and the shifter, if necessary) it should be a reasonably compact unit. Let me know, please.

Oh yeah, dibs on the T-84's, since no-one has claimed them yet.

david im also interested in the master cylinder assembly mine is leeking where the brake fluid resivoir* is connected to the piece where the lines connect. if you can shoot me a price for it and shipping to montgomery ala or we could meet up at wagon fest either way i am in need of 1. oh its the same as 92 rmw? thanks

roadmastercouple wrote:

hey im interested in the wood grain on the doors interior around the window switches ect. will the fit my 92 roadmaster my interior pieces are all blue and i want to replace them with the grain thanks

roadmastercouple wrote:

david im also interested in the master cylinder assembly mine is leeking where the brake fluid resivoir* is connected to the piece where the lines connect. if you can shoot me a price for it and shipping to montgomery ala or we could meet up at wagon fest either way i am in need of 1. oh its the same as 92 rmw? thanks

The trim may be sold already, and I'm not sure if they are the same for the TBI RMWs or not.

I'm not sure on the interchange on the master cylinder. Rockauto shows the dorman one fitting 91-96, but all the other ones listed only show 95-96. 95 was when they changed the ABS system, not sure if it matters. At any rate, I can do $30 shipped if you want to try it.

jimbeau wrote:

David, I'm interested in the column. Could I convince you to ship it if you remove the steering wheel & air bag? Don't need those.
If you pull out the turn signal stalk (and the shifter, if necessary) it should be a reasonably compact unit. Let me know, please.

Oh yeah, dibs on the T-84's, since no-one has claimed them yet.

This one doesn't have the T84 lights, if it did I would have bought it just for those

ok sold on the master cylinder let me know how you want the payment and the postage info please. and let me know if the other iterior trim buyer falls through please. thank you

david i dont need the rocker trim . tim(bigblackbeaSST) picked it up for me thanks anyway

roadmastercouple wrote:

ok sold on the master cylinder let me know how you want the payment and the postage info please. and let me know if the other iterior trim buyer falls through please. thank you

I'll get it pulled this weekend for you and get back to you.

mtrhead79 wrote:

david i dont need the rocker trim . tim(bigblackbeaSST) picked it up for me thanks anyway

Cool, I tried to get it off but the rusted mess that is holding the stripped screw in would not give.

ok thanks sounds good

Is the grille available? If so how much would you like to get out of it?

I need the corner woodgrain moulding for the driver's front fender if you have one. Thanks. Shaun 972.467.3035

Do you have the woodgrain corner molding that is directly behind the side marker light?
Thanks Shaun 972.467.3035

Hi,
Does that wagon still have parts up for grabs? I need the center caps on the wire wheels. Also, if two of the wire hub caps are good?

Thanks
Randy

yakko wrote:

Hi,
Does that wagon still have parts up for grabs? I need the center caps on the wire wheels. Also, if two of the wire hub caps are good?

Thanks
Randy

Sorry. I snagged the center caps when I was at his house. However, the hubcaps were still good. Dunno if he still has them thou.

Bummer, I need a couple center caps too. I still need two wire caps though. Also, I need a new speedometer display. It's doing funny things on my car. It resets the trip meter when I turn the car off.

Thanks
Randy