ZR1 Rear bumper

Does anyone have this, or a pic of it on a car? I would like to see it before i buy, i am thinking the lights looks a bit close to each other, and maybe it make the car look narrow in the rear.. I love the idea though, and a kit like this is a lot easier then modifying the original bumper...

http://www.streettrendsinc.com/Merchant2/merchant.mvc?Screen=PROD&Store_Code=BBODY&Product_Code=11186&Category_Code=BMPS

this libk is nothing but custom wagons. I know that there are a few within the pages available.

http://www.cusstom.com/categories.php?cat_id=8&sessionid=c2800e7c2803fedd0d4983e12cf5766a

I was looking at this my concern was the lights are very low.

A guy who lives a few blocks from me has that bumper on his white Caprice wagon. It looks very cool, and it makes the rear end look even lower. Obviously, you will also need to fill in the openings where the original tail lights were.

You have to fill the license plate recess in the gate as well. There used to be a company that made steel filler pieces for the tail lights, but I do not have their website.

here is the link for taillight fillers
http://grantkustoms.com/catalog/fillers-taillight-fillers-chevygmc-chevy-caprice-wagon-taillight-fillers-p-42.html?osCsid=98304fb64c063ea3725c0a4625f1c4d1

mtrhead79 wrote:

here is the link for taillight fillers
http://grantkustoms.com/catalog/fillers-taillight-fillers-chevygmc-chevy-caprice-wagon-taillight-fillers-p-42.html?osCsid=98304fb64c063ea3725c0a4625f1c4d1

Remember that those fillers wont work on the roadmaster or custom cruiser due to the tailights being all different heights.

you might be able to use them and add some fiberglass to the roll pan to fill in the gap

Dont most rollpans come a little long in that area anyway just for that reason?

the one i have for my caprice fits nice. it does not go up past the taillight trim