I ordered a fuel pressure regulator when I ordered a replacement fuel pump (which solved my issue), but I decided to replace the regulator, yesterday.
Can anyone describe how to remove the pressure line to regulator clamp? From the FSM drawing, it appears to swing open, but how that’s done sure isn’t obvious.
Would it be a good idea to have a spare clamp on hand, before I start?
I’m thinking the best way may be to disconnect the short pressure line from the supply line, remove the regulator from the fuel rail, and try to open the clamp on the bench. Doing so, looks like it will require removing the fuel and return line clamp, which is held together with a nearly inaccessible torx screw.
Anyone have any experience with this?