'95+ doors on a '93

I have a '93 RMW that has dings and dents all on the front 2 doors, would '95 and up doors fit... And would it be possible to put my original interior panels back on?

not an issue, was once a common mod to get the bigger mirrors. the only thing to note is that the upper wood trim is one long piece on the newer doors vs the two pieces on the older ones.

Your interiors will fit with a couple of small mods. The 95+ doors do not have the arm rest support, so you have to swap yours to the doors. The 95+ doors have two small standoffs for the straps that you must take off. Swap your locks to keep the single key for everything. If you are going to swap the hinges with the 95+ doors, you will  have to remove the front fenders to get to the bolts. If you remove the front fenders, make sure you keep the shims in the same places (I use ziplock plastic bags). Removing the fenders does not require the removal of the wheelhouses, but is easier if you remove the support with the fender. Remember the small bolts under the body, and the wheel opening trim.