1996 RMW Need Photo of back side of front fender

If somebody has a photo of the back side of the front fender for a 1996 RMW could you please post it. I ma interested in the area aft of the front wheel. Need to see if tat area is just a single layer of sheet metal or if there is a brace or stiffening rib. Have a small dent in this area that I need to try an push out. Don't want to fix it from the front as I'll lose the woodgrain. Already tried PDR from the front and that won't work. TIA

It is a single layer of metal. There is a brace bolted to the fender, that extends to the bottom. The fender is bolted to the wheelhouse along the edge of the fender, and the brace is bolted to the wheelhouse with the 13mm bolts along the top of the wheelhouse. You can almost look into the fender from the top.

Drop the wheel house and you should have good access to your dent.

Thanks for the info guys