GM Longroof Forum
Would you like to react to this message? Create an account in a few clicks or log in to continue.



 
HomeHome  PortalPortal  GalleryGallery  Latest imagesLatest images  SearchSearch  RegisterRegister  Log in  

 

 Parting out my 96 RMW

Go down 
+7
92OCC
Fred Kiehl
JedBet96
cheesey24
theblurrrr
ayilar
WhiteBird
11 posters
AuthorMessage
WhiteBird

WhiteBird


Posts : 113
Join date : 2021-11-27
Age : 79
Location : WEST VIRGINIA EASTERN PANHANDLE

Parting out my 96 RMW Empty
PostSubject: Parting out my 96 RMW   Parting out my 96 RMW Icon_minitimeSat Jan 06, 2024 2:07 pm

I am parting out my 96 RMW. I have a lot of good stuff. Three good grilles, two rear wiper motors, two front wiper motors complete.
You name it, it's there, interior and exterior. Just let me know and I will let you know. Thankx PS: Interior is blue.

JedBet96 likes this post

Back to top Go down
ayilar

ayilar


Posts : 141
Join date : 2021-03-28
Location : USA

Parting out my 96 RMW Empty
PostSubject: Re: Parting out my 96 RMW   Parting out my 96 RMW Icon_minitimeSat Jan 06, 2024 3:36 pm

@WhiteBird -- I am interested in:

1. the flyaway panels, if yours are complete with clips (both sides would be great, but the driver side is what I'd really want);
2. the rear driver-side door edge guard;
3. if you have one in good condition and are willing to part it out, the fan belt tensioner and pulley.

Thank you!

P.S. regarding item 3. I have a RMW and a FWB both with LT1 and Tow Package. Both run great, so I do not presently need item 3. Therefore, if someone else needs one because theirs is out of commission, then they should get priority over me even if I was first in responding -- but otherwise, I am interested in getting it (P/N 10186118 ). That's because I would like to have an insurance policy in case the bearing and/or spring die(s) on mine and/or my pulley dries up and cracks.
Back to top Go down
WhiteBird

WhiteBird


Posts : 113
Join date : 2021-11-27
Age : 79
Location : WEST VIRGINIA EASTERN PANHANDLE

Parting out my 96 RMW Empty
PostSubject: Re: Parting out my 96 RMW   Parting out my 96 RMW Icon_minitimeTue Jan 09, 2024 6:38 pm

Dear Mr. ayilar

Good day Sir. I am sending you a PM in regard to the flyaway/sail panels off my 92 RMW

Cheers










ayilar likes this post

Back to top Go down
WhiteBird

WhiteBird


Posts : 113
Join date : 2021-11-27
Age : 79
Location : WEST VIRGINIA EASTERN PANHANDLE

Parting out my 96 RMW Empty
PostSubject: Re: Parting out my 96 RMW   Parting out my 96 RMW Icon_minitimeTue Jan 09, 2024 7:10 pm

Just noticed that I typed 92 instead of 96 RMW. I did own a 92 RMW at one time.
So, the flyaway panels are off my 96 RMW.

ayilar likes this post

Back to top Go down
ayilar

ayilar


Posts : 141
Join date : 2021-03-28
Location : USA

Parting out my 96 RMW Empty
PostSubject: Re: Parting out my 96 RMW   Parting out my 96 RMW Icon_minitimeWed Jan 10, 2024 4:47 pm

Thank you @WhiteBird -- I sent you PMs in reply.
Back to top Go down
theblurrrr

theblurrrr


Posts : 38
Join date : 2012-10-30
Location : Olympia, WA

Parting out my 96 RMW Empty
PostSubject: Re: Parting out my 96 RMW   Parting out my 96 RMW Icon_minitimeThu Jan 11, 2024 2:56 pm

Looking for the parking brake assembly. PM sent.
Back to top Go down
cheesey24




Posts : 1
Join date : 2024-01-12

Parting out my 96 RMW Empty
PostSubject: Re: Parting out my 96 RMW   Parting out my 96 RMW Icon_minitimeFri Jan 12, 2024 2:19 pm

Been looking for the Driver's Side, rear corner trim.

Will send DM soon

Thanks!
Back to top Go down
WhiteBird

WhiteBird


Posts : 113
Join date : 2021-11-27
Age : 79
Location : WEST VIRGINIA EASTERN PANHANDLE

Parting out my 96 RMW Empty
PostSubject: Re: Parting out my 96 RMW   Parting out my 96 RMW Icon_minitimeFri Jan 12, 2024 3:56 pm

Dear Mr., cheesey24

Good day to you Sir. Yes, I do believe I have one. You are referring to the stainless steel with black molding on it trim piece.
Back to top Go down
JedBet96




Posts : 17
Join date : 2024-01-09

Parting out my 96 RMW Empty
PostSubject: Re: Parting out my 96 RMW   Parting out my 96 RMW Icon_minitimeFri Jan 12, 2024 7:46 pm

@WhiteBird- do you have seats and are they the limited ones front and rear and the cargo shade?
Back to top Go down
JedBet96




Posts : 17
Join date : 2024-01-09

Parting out my 96 RMW Empty
PostSubject: Re: Parting out my 96 RMW   Parting out my 96 RMW Icon_minitimeFri Jan 12, 2024 8:01 pm

I am too new to PM could you pm as I have a few questions.
Back to top Go down
ayilar

ayilar


Posts : 141
Join date : 2021-03-28
Location : USA

Parting out my 96 RMW Empty
PostSubject: Re: Parting out my 96 RMW   Parting out my 96 RMW Icon_minitimeSat Jan 13, 2024 11:55 am

More information on @whitebird's car can be found here -- looks like it'll yield lots of good parts:

https://gmlongroof.4umer.com/t16161-1996-rmw-for-sale
Back to top Go down
WhiteBird

WhiteBird


Posts : 113
Join date : 2021-11-27
Age : 79
Location : WEST VIRGINIA EASTERN PANHANDLE

Parting out my 96 RMW Empty
PostSubject: Re: Parting out my 96 RMW   Parting out my 96 RMW Icon_minitimeSun Jan 14, 2024 8:57 am

Dear Mr. JedBet96

Tried to PM you but! the message service said " you are not a member" so no PM
To answer your question, my 96RMW is not a limited addition so no limited seats.
But I do have a cargo/security cover. It's not blue, it's lite beige/tan and it is for
sale if you interested. Cheers

PS: The driver's seat in the 96 RMW is hooped, rips/ tears, all the other seats are in reasonable
condition, no tears or blemishes. Dark blue.
Back to top Go down
JedBet96




Posts : 17
Join date : 2024-01-09

Parting out my 96 RMW Empty
PostSubject: Re: Parting out my 96 RMW   Parting out my 96 RMW Icon_minitimeSun Jan 14, 2024 12:45 pm

Thank you Mr. Whitebird for the reply. I am a newer member so I'm trying to post away to be included. At the moment my seats will have to do and as far as my cargo cover, I will tinker with it to see if there is an internal spring that pushes the ends outward. Have a blessed day kind sir!
Back to top Go down
Fred Kiehl

Fred Kiehl


Posts : 7162
Join date : 2009-11-13
Age : 75
Location : Largo, FL 33774

Parting out my 96 RMW Empty
PostSubject: Re: Parting out my 96 RMW   Parting out my 96 RMW Icon_minitimeSun Jan 14, 2024 10:16 pm

The front mounts are sprung to fully engage the braces/sockets on the speaker covers, so they do not rotate. The rear rod is sprung, and has a rubber bumper on each end.

JedBet96 likes this post

Back to top Go down
JedBet96




Posts : 17
Join date : 2024-01-09

Parting out my 96 RMW Empty
PostSubject: Re: Parting out my 96 RMW   Parting out my 96 RMW Icon_minitimeSun Jan 14, 2024 11:26 pm

Fred Kiehl wrote:
The front mounts are sprung to fully engage the braces/sockets on the speaker covers, so they do not rotate. The rear rod is sprung, and has a rubber bumper on each end.
Thank you Mr. Fred for clarifying, I will have to see if I can disassemble the ends, my springs must have sprung lol!
Back to top Go down
Fred Kiehl

Fred Kiehl


Posts : 7162
Join date : 2009-11-13
Age : 75
Location : Largo, FL 33774

Parting out my 96 RMW Empty
PostSubject: Re: Parting out my 96 RMW   Parting out my 96 RMW Icon_minitimeMon Jan 15, 2024 8:21 am

Which ends?
Back to top Go down
JedBet96




Posts : 17
Join date : 2024-01-09

Parting out my 96 RMW Empty
PostSubject: Re: Parting out my 96 RMW   Parting out my 96 RMW Icon_minitimeMon Jan 15, 2024 8:24 am

The front ones that slide Iinto the speaker area
Back to top Go down
Fred Kiehl

Fred Kiehl


Posts : 7162
Join date : 2009-11-13
Age : 75
Location : Largo, FL 33774

Parting out my 96 RMW Empty
PostSubject: Re: Parting out my 96 RMW   Parting out my 96 RMW Icon_minitimeMon Jan 15, 2024 8:28 am

If you call me, I can walk you through it.
I will PM you

ayilar likes this post

Back to top Go down
92OCC




Posts : 10
Join date : 2021-08-07

Parting out my 96 RMW Empty
PostSubject: Re: Parting out my 96 RMW   Parting out my 96 RMW Icon_minitimeMon Jan 15, 2024 5:39 pm

WhiteBird wrote:
I am parting out my 96 RMW. I have a lot of good stuff. Three good grilles, two rear wiper motors, two front wiper motors complete.
You name it, it's there, interior and exterior. Just let me know and I will let you know. Thankx PS: Interior is blue.

I’m looking for a passenger side rear quarter window. Do you have any?
Back to top Go down
WhiteBird

WhiteBird


Posts : 113
Join date : 2021-11-27
Age : 79
Location : WEST VIRGINIA EASTERN PANHANDLE

Parting out my 96 RMW Empty
PostSubject: Re: Parting out my 96 RMW   Parting out my 96 RMW Icon_minitimeTue Jan 16, 2024 8:47 am

Dear Mr., 920CC

Good day Sir. I do not think that the 96 RMW and the 92 OCC rear quarter windows are compatible.
Ask Mr. Frad Kiehl and he will let you know one way or the other. Cheers
Back to top Go down
shrimpNE




Posts : 69
Join date : 2017-09-13
Location : Victor,NY,14564

Parting out my 96 RMW Empty
PostSubject: Re: Parting out my 96 RMW   Parting out my 96 RMW Icon_minitimeWed Jan 17, 2024 7:00 pm

What area do you live in?
I need the inner fenders
Back to top Go down
WhiteBird

WhiteBird


Posts : 113
Join date : 2021-11-27
Age : 79
Location : WEST VIRGINIA EASTERN PANHANDLE

Parting out my 96 RMW Empty
PostSubject: Re: Parting out my 96 RMW   Parting out my 96 RMW Icon_minitimeThu Jan 18, 2024 8:49 am

Dear Mr., shrimpNE

Good day to you Sir. There is only one good inner fender. The driver side is shot, rusted big time. It came that way. The pax side is good. I reside in the eastern panhandle of WV. Near Hedgesville, WV Fifteen miles west of interstate I 81. Off of RT 9 west. Cheers
Back to top Go down
Rich Cicciu




Posts : 3
Join date : 2023-04-04

Parting out my 96 RMW Empty
PostSubject: White/tan interior, 96   Parting out my 96 RMW Icon_minitimeSat Jan 20, 2024 11:35 am

I need some interior parts, looking for door panels r/h side and seat belt assy,....what you got?
Back to top Go down
WhiteBird

WhiteBird


Posts : 113
Join date : 2021-11-27
Age : 79
Location : WEST VIRGINIA EASTERN PANHANDLE

Parting out my 96 RMW Empty
PostSubject: Re: Parting out my 96 RMW   Parting out my 96 RMW Icon_minitimeSat Jan 20, 2024 3:11 pm

Dear Mr. Rich Cicciu

I have the door panels, the interior of my 96 RMW is blue. See pics below.

Parting out my 96 RMW Img_1312

I believe Mr. Fred Kielh may have the panels you are looking for.
Your post mentioned white/tan and as you can see my 96 RMW is blue.

Parting out my 96 RMW Img_1313

Cheers
Back to top Go down
flapman

flapman


Posts : 8
Join date : 2014-06-09
Location : Colerain, NC

Parting out my 96 RMW Empty
PostSubject: Re: Parting out my 96 RMW   Parting out my 96 RMW Icon_minitimeSat Jan 20, 2024 7:23 pm

I need the back seat safety belts, all 3 of them. Blue is the color.
Back to top Go down
WhiteBird

WhiteBird


Posts : 113
Join date : 2021-11-27
Age : 79
Location : WEST VIRGINIA EASTERN PANHANDLE

Parting out my 96 RMW Empty
PostSubject: Re: Parting out my 96 RMW   Parting out my 96 RMW Icon_minitimeSun Jan 21, 2024 8:45 am

Dear Mr., flapman. Good day to you Sir. Yes, the colour is blue and they are available. I have no idea on what they are worth. So! @ $50.00 a piece times three = $150.00 USD + shipping. As y'all's know it's winter here and I'm old, so! nothing is going to happen here until things warm up. ThankxParting out my 96 RMW Img_1315

Cheers
Back to top Go down
G.N.Courtney




Posts : 10
Join date : 2012-03-23

Parting out my 96 RMW Empty
PostSubject: Roof rack cross bar and thumb screws   Parting out my 96 RMW Icon_minitimeSat Feb 17, 2024 7:31 pm

Looking for one roof rack cross bar and the two thumb screws. If available please let me know.
Back to top Go down
WhiteBird

WhiteBird


Posts : 113
Join date : 2021-11-27
Age : 79
Location : WEST VIRGINIA EASTERN PANHANDLE

Parting out my 96 RMW Empty
PostSubject: Re: Parting out my 96 RMW   Parting out my 96 RMW Icon_minitimeSat Feb 17, 2024 8:10 pm

Dear Mr. G.N.Courtney.... Good day Sir. yes, indeedy I have one for sale, $55.00 USD shipped.
Long items cost more to ship. Cheers
Back to top Go down
G.N.Courtney




Posts : 10
Join date : 2012-03-23

Parting out my 96 RMW Empty
PostSubject: Re: Parting out my 96 RMW   Parting out my 96 RMW Icon_minitimeSat Feb 17, 2024 9:53 pm

Email payment instructions to gncourtney@gncourtney.com. many thanks!
Back to top Go down
Sponsored content





Parting out my 96 RMW Empty
PostSubject: Re: Parting out my 96 RMW   Parting out my 96 RMW Icon_minitime

Back to top Go down
 
Parting out my 96 RMW
Back to top 
Page 1 of 1
 Similar topics
-
» PARTING OUT 94 RMW
» Parting out '96 RMW
» 95 RMW parting out
» Parting out 1994 RMW.
» Parting out the Tank

Permissions in this forum:You cannot reply to topics in this forum
GM Longroof Forum :: The Longroof Marketplace :: Parts For Sale-
Jump to: