How to glue on sail panels?

Okay I have a set of sail panels to install before Saturday and don't wanna lose 'em, what is the best way to glue those bad boys on the door?

As a second, The piece of cladding for the pass door has the metal broken and I need to glue it back to the cladding before I bolt it back on, thinking 2-part epoxy?


thanks guys. Less than 72 hours to finish my prep.

clear silicone, and masking tape to hold it while it cures for 24 hours

I used thick 3M tape on the FATWUDY and it held as long as I owned it...

guess I pbetter clean al the old goo off the backs, lol

Urethane windshield adhesive. You will never lose that panel again.

Just make sure to mask the area around there because that goo is messy.

5/8th self tappers,. pretty sturdy,.

nick

This should work.........

Krzdimond wrote:

This should work.........

I got those, they work great!

word of advice wear hearing protection if you plan on using one in a closed space....

What?

I c wut u did ther.

Let me know what you use and how well it works. I still haven't put mine back on. I was waiting for you to "practice" so hopefully I only have to do this once

Jon

toomanytoyz wrote:

I used thick 3M tape on the FATWUDY and it held as long as I owned it...

soooo....not too long?

a1awind wrote:

toomanytoyz wrote:

I used thick 3M tape on the FATWUDY and it held as long as I owned it...

soooo....not too long?

Zing!

Now that we know 3M tape is good for 72 hours... it could have many other applications.

well I might use some of the tile adhesive I have left over from the kitchen counter......or go with the Phillips head rhinstone look Nick suggested. If I have time I'll get the windshield goo otherwise it'll be silicone....(stuck the grille ornament back on with that 2nite).