Parting out 1991 Oldsmobile Olds Custom Cruiser

Hi, i am parting out my 91 OCC parts car. This used to be the old family car my parents bought when i was born. We bought it back to help fix my 95 RMW with. I want to part it out to get some of my money back and i would like to see the parts go to another car to help other B-bodies live longer. Parts that are not available are the glass, front end and hood, differential, front spindles, cargo lights, hitch, coolant tank, car jack, and steering box. Has 350 Chevy with 100,000 miles on it, runs great. Smokes a puff on start-up, looks like valve seals. My Dad rebuilt and installed this engine when car had 78K miles on it. Engine is from an '87 or '88 truck, throttle body injected. Newer transmission. Engine and trans $600.
Has 10 slot Oldsmobile wheels with center caps. $250
Has power windows, all work
Has power driver seat, also works fine. 60/40 split, blue velour interior.
Cloth third seat
All moldings are there except for passenger side front door
Not much in the way of good sheetmetal, but we can check it out if you need something.
I also have the headlight/airbag electrical harness
Pm me or Post
Thanks

Tim

https://servimg.com/view/17925789/4https://servimg.com/view/17925789/5https://servimg.com/view/17925789/6https://servimg.com/view/17925789/7https://servimg.com/view/17925789/8https://servimg.com/view/17925789/9https://servimg.com/view/17925789/10

Glws of the parts. Find out through a quick search here what parts are Olds specific, and make sure to save them. May not be a buyer today, but worth saving. Cloth 3rd seat,cladding, taillights, cluster, etc etc.

If you can manage to get that hitch off there's always someone on here looking for a class III.

Jon

I think they stated the hitch was not for sale.

How much do you think it would cost for the upper fan shroud shipped to 40342. I cracked the top of mine trying to hook up a stupid inline fuel pressure gauge adapter to the tbi fuel pod. Biggest pain in the A$$ job to do. Needless to say I ended up climbing up in the engine compartment and placed my knee on the fan shroud cracking it. Not to mention I cut new threads into the fuel pod inlet hose area. Did I mention hooking up that adapter is a pain in the A$$? I had to buy a new fuel pod Oh well good learning experience though. Fuel pump was going bad would provide adequate pressure just not enough volume when under load.

How does $35 shipped sound for the shroud? if you would like pictures i can email them to you if i have your email address. thanks

How much for the c pillar plastic covers that like to fall off at the most inopportune times?

Blue inside?

How much for the driver door panel, center console, door handle surrounds for all four doors 7 power window switches/panels?
Also seat belt covers (on the pillars), unless Flasheroo needs those... These are the covers that hide the bolts.

95CCRMW wrote:

How does $35 shipped sound for the shroud? if you would like pictures i can email them to you if i have your email address. thanks

PM sent

Shawn,I was looking for the sail panels that are taped to the C pillars that seem to go sailing off usually in the middle of the night during a thunderstorm.And you reminded me that I also need the
blue plastic housing that contains the drivers seatbelt and center seatbelt and is bolted to the
driveshaft tunnel.You can have the B and C pillar inside seatbelt housings. guess I am very fortunate as thats all I can think of for the OCC.

All I wanted was the cooling fan upper shroud.

Sorry Shawn,I meant Sven/ s1l1sc.

Hi, i will take parts off and give prices once everything is agreed upon. i will take pictures of all the parts that you wish. How many posts do i have to have before i can private message? unfortunately the only good pillar seatbelt bolt cover i have is one from the rear. If i have your emails i can send pictures of the items requested. thanks

Tim

Thats Okay Tim,I still want the C pillar sail panels for my 91 OCC.Had the wagon for over 8 years and thats a record for me.Never kept
anything that long and cant imagine being without this wagon ever.The color dont matter as I want to repaint my original panels the
original light adriatic blue!
Thanks Tim'
Jim Gordon

e-mail: s1l1sc(at)lauterwasser(dot)net

s1l1sc wrote:

e-mail: s1l1sc(at)lauterwasser(dot)net

You can add, if you want, your email address in your "profile".

Tom

How do i safely take off the door panels? I cannot figure out how they detach on the top.

I could help you if it were a Roadmaster. But have never removed a Custom Cruiser panel. Probably isn't much difference. The guy that would know is "Fred Kiehl" as he has two Custom Cruisers. He will probably pop in here pretty quick.

I know you are being cautious in not forcing the panel, which is very good, as they are scarce and break easy.

Tom C.

95CCRMW wrote:

How do i safely take off the door panels? I cannot figure out how they detach on the top.

they are all the same for door panels.

push the top down and toward the glass then lift up, should pop right out. Of course the rest of the screws need to be out first.

Watch the hidden screw in the carpet on the lower panel....

I need roller shell to rebuild my 91 CC how much.

Do you mean a rolling shell?Without engine or transmission?

Hi, well the body on this custom cruiser is pretty rusted out, this is why i am parting it out, plus i needed the front end for my wagon that it have. so there is no front end

I'm interested in all four power window motors and power lock actuators, mine have all given up the ghost. I apparently can't send PMs yet, but my email should be in my profile.

do you have the taillights? I am interested.

Did this car have the auto-leveling rear suspension? (air compressor and air shocks) I am looking for the height sensor assembly that connects the body to the upper control arm, including mounting brackets, linkage, wiring harness, etc. (don't need the compressor)
I know the Buicks with trailer tow option had these, but not sure about the Oldsmobiles. Thanks.

Geezer Wheezer wrote:

Did this car have the auto-leveling rear suspension? (air compressor and air shocks) I am looking for the height sensor assembly that connects the body to the upper control arm, including mounting brackets, linkage, wiring harness, etc. (don't need the compressor)
I know the Buicks with trailer tow option had these, but not sure about the Oldsmobiles. Thanks.

My caprice had auto leveling. Most, if not all, of the hardware is still under it, just disconnected. What year is your car? There is a difference between TBI and LT1 cars I believe. I'm in W.Mass too so I could get it to you easily.

Cadet57-
My car is 96 RMW (LT1). I'm not sure why the autoleveling would be affected by the engine type. But I'm interested no matter what.

The later cars, they changed where the pump is, and some other things, IIRC.

Well, I don't need the pump - just the height sensor and related parts up under the rear end.

Geezer Wheezer wrote:

Well, I don't need the pump - just the height sensor and related parts up under the rear end.

Sent you a PM

Got a working radio by any chance? Thanks!

I'm looking for the rear window latch hardware and rear wiper stop and motor. And possibly the dash switch for these.

I need this, if you still have it, how much?

thanks

Affectionately known as sail panels (as in they sail off while driving)

Good name for em'

I'm looking for all the side moulding if its still available, if it is please email(novajoe67@hotmail.com) some pictures and your price. Many thanks Joe

Hello, i still have the car and am currently taking everything apart and out of the car(now that i have a place to store the parts). I am very sorry for not responding to everyones posts and requests. i have not been on the site or done anything with the car until now because of school and work. if anyone is interested i still have the engine and trans and would like to sell them as a pair. i also have all four olds rims with center caps, make me offers on them if interested. please resend me pms for parts needed so i can get a current list and get back to everyone. thank you

Tim

You still have the motor/trans combo?

Hi, i do still have the engine and trans, the engine ran well before i parked it and the transmission shifted as it should, if interested make me an offer. thanks

Tim

looking to get a wagon tank and pump lid to 92867 PM me plz

Don't know what you have left. Looking for the keyless entry module. Olds 91-92 only. Black box located behind the left interior wheel house trim panel. 2 plugs with about 8 wires each. Thanks Ron B.

Hey, needing a fuel tank(91 CC) that is in good shape. Mine is leaking where the dimple goes up in the tank.(crack at top) I don't need any pumps filters straps etc. shipping to 28602 Thanks

hi, sorry i dont check the forums much anymore because of school, i checked the wagon and i dont think it has the keyless entry module, it didnt come with one. im sorry im not willing to ship the gas tank because of the hassle it would be to ship. i still have the car so if anyone needs anything i will try to get back to you about it, thanks

Do you still have a good blue driver side front door panel?