bcreasy
Posts : 84 Join date : 2011-05-14 Location : Indaina
| Subject: stock posi Thu Jun 02, 2011 6:55 pm | |
| I want to swap gears I want to know if the stock posi unit is good? If not whats a good one? From where?
Plan on doing exhaust headers x pipe high flow cats flowmaster knock offs. Stall shift kit and 3.73's
Thanks Beau | |
|
Cadet57
Posts : 3047 Join date : 2010-04-13 Age : 37 Location : Chicopee, MA
| Subject: Re: stock posi Thu Jun 02, 2011 6:59 pm | |
| Couple guys on the New England board use Eaton and they are happy with them from what I gather. Also, don't you have 2:56's? If you do you'll need a whole new rear carrier. 3:73's won't fit. | |
|
bcreasy
Posts : 84 Join date : 2011-05-14 Location : Indaina
| Subject: Re: stock posi Thu Jun 02, 2011 7:45 pm | |
| | |
|
Cadet57
Posts : 3047 Join date : 2010-04-13 Age : 37 Location : Chicopee, MA
| Subject: Re: stock posi Thu Jun 02, 2011 7:46 pm | |
| - bcreasy wrote:
- Tow package. 2.93
Oh ok. I think 2:93 and up have the same carrier. | |
|
Guest Guest
| Subject: Re: stock posi Thu Jun 02, 2011 7:55 pm | |
| Yes Justin you are correct.2.73 and above use the same carrier.So Beau you are good to go on going with a posi and the guys up north know a lot more about than I do. Jim Gordon |
|
Guest Guest
| Subject: Re: stock posi Sun Jun 05, 2011 8:49 am | |
| any one have info on how to figure out what gear I have?
I know normally there is a tag on the diff, or on the door, that will have a code that tells you. |
|
Cadet57
Posts : 3047 Join date : 2010-04-13 Age : 37 Location : Chicopee, MA
| Subject: Re: stock posi Sun Jun 05, 2011 8:56 am | |
| | |
|
Fred Kiehl
Posts : 7290 Join date : 2009-11-13 Age : 76 Location : Largo, FL 33774
| Subject: Re: stock posi Sun Jun 05, 2011 10:48 pm | |
| - DethWgn187 wrote:
- any one have info on how to figure out what gear I have?
I know normally there is a tag on the diff, or on the door, that will have a code that tells you. On a wagon it is on the PS D pillar when you open the gate. | |
|