Wagonfest 2011 Parts For Sale - Wanted - Trade Thread

May as well get this going now so that people have time to get things gathered together.

Pair of '96 RMW Limited front seats (with power rails) in beige leather. The driver's seat has been fitted with a passenger side seat bun and cover, so the place where the controls were is visible unless you have a console. I will include the driver's seat control pad, but the left side of the cover needs the leather trimmed so it may be installed - $50.00





Steering column for a '94 SS, grey of course - with keys - $40.00

Set of lightly used 9C1 wide calipers and pads removed prior to installing the M-B stuff, I'll toss in a pair of the hoses if anyone wants them too. - $30.00



NOS LT1 crossmember and I'll toss in an adapter bar that allows it to bolt into a '91-93 chassis - in case someone wants to upgrade to dual exhaust. $60.00

Pair of F-body assembled aluminum cylinder heads - these are the early casting number 10207643 as specified by AI for porting. Used, but should be low miles and are in good condition. $175.00.



I'll post more parts as I think of them.

- J

Thats a really good deal on the seats,. i,ve sat in them in the basement at chez jay SS,. perfect for the blazer console for a roady

dibs on the occ front bumper cover,.bring it to WF along with the turbo please,.




nick

Still looking for left and right rear quarters.

Also, looking for an electric fan set up, need the whole kit, minus wiring harness.

Heres my incomplete list:
94 RMW gas tank, no sending unit: $40
LT1 intake: $40
N97s- will need to be painted, some have tires with little tread: $25 each
92 OCC PS rear quarter cladding- Bought from Fred for my 91, but this ended up being off a 92: $40
LT1 home plates - I have a few of these all of a sudden. FREE
91-92 RMW left tail, brown trim (opposed to later black): $30
Blazer overhead console (black): $20
Blazer center console, black, missing insert for tray, column shift type: FREE
91 OCC grille, dark maple, no emblem, chrome is bad: $30
I'm sure there is more, will add later as I think of it. All prices are OBO delivered to the fest. I'll get some pics of anything anyone is interested in.

I still need these ruby red interior parts:
Concert sound driver's door handle surround
Non-limited cloth passenger seat (don't need rails)
complete rear seat, both pieces
Driver's side rear door sill trim

I'm sure there's more, but if you have any ruby red interior trim pieces, please LMK!

toomanytoyz wrote:

I still need these ruby red interior parts:
Concert sound driver's door handle surround
Non-limited cloth passenger seat (don't need rails)
complete rear seat, both pieces
Driver's side rear door sill trim

I'm sure there's more, but if you have any ruby red interior trim pieces, please LMK!

Order the SEM paint. I gave up....and the SEM worked fine.

I have a pair of quarter glass for RMW (or 91 OCC) if anyone is interested. Obviously they are a bit large so payment in advance for me to load them up and deliver to WF. Glass is good and still in the "frame", vent windows included and pics available on request. $50 each, make offer.

toomanytoyz wrote:

I still need these ruby red interior parts:
Concert sound driver's door handle surround
Non-limited cloth passenger seat (don't need rails)
complete rear seat, both pieces
Driver's side rear door sill trim

I'm sure there's more, but if you have any ruby red interior trim pieces, please LMK!

PM sent.

Have a few things for sale/trade, pics upon request. Might have some more stuff once I clean out my garage.

1 Riviera console. Caprice gray, no trim. Maybe just good for parts, idk. $20

Lots of door rubber, not sure what each piece is. $5 each

Oh, and one more thing i'm looking for. Fleetwood/ RMS dual horn set up. Need the horns and the wiring.

If anyone has a parts car with CLEAN floors they're willing to cut up send me a PM. Its kind of a long shot but I'm in need of some large patches. I'll work on getting general dimensions from some reference points.

matthimself456 wrote:

If anyone has a parts car with CLEAN floors they're willing to cut up send me a PM. Its kind of a long shot but I'm in need of some large patches. I'll work on getting general dimensions from some reference points.

Matt - If you want to come down for a weekend there is a clean sedan and a couple of wagons locally in yards. You are welcome at the house anytime.

----------------------------------------------

9 doors!!!!

I have some rear and third seats left.

some wagon interior pieces.

Lots of wood trim in various condition.

Some performance stuff.

Doors, mirrors, clusters, PCM's, tanks (coolant and washer) did I mention doors.

Front bumper covers.

Stainless roady trim.

Couple of fenders.

Inner fender passenger.

rear window. door trim.

some door panels, though none are perfect.

Sail panels for Roadmasters.

Aluminum engine cover. This is a nice piece, sheet aluminum someone bent up to go over the intake and fuel injectors, was painted black and red under that I stripped it and began to polish it. Some light sanding and polishing it would really pop.....

NOS 96 stock wheel center in box.....

polished Dynomax Stainless Steel 17271 2 1/4" in/out offset mufflers, new in box......

Blazer (dark grey) center console with shifter complete with cable and stock blazer brackets..........

SOLDDouble Din GM radio with CD and Tape in it. Not sure it it works, but we can test on your car at the fest......... I wanted to use it but both my cars are 1994.

Tan Bonnieville seats. On small tear in one seat.

Aluminum engine cover. This is a one piece that covers the intake and injectors. Natural aluminum with slight polish.

Tim

JaySS wrote:

Steering column for a '94 SS, grey of course - with keys - $40.00

- J

I'll take that steering column. PM sent!

Also, I'm looking for a set of Caprice Wagon roof rack cross members, the moveable ones that run across the car.

I don't have much to offer... a '94 gray cloth drivers "60" bench seat from a Caprice. Also a gray cloth drivers "60" bench seat from a Caprice. Both free to a good home. They are in good shape.

PM sent to WagonCollector on the roof rack cross bars.

For sale: Front fenders, core support, inner fenders from a 1995 DGGM Buick Roadmaster wagon with wood. This is a solid, no rust front clip that was originally bought to repair a friends car. The car ended up getting parted out and was not repaired. We don't want to bring this to Wagonfest unless there is some serious interest.

Mike

Update: Front clip still available, but after looking at it.... Not so clean and rust free, not awful, but rusted in all the normal places.
Mike (81X11) would run screaming, Our Canadian friends would say not awful. It's all relative.

I am parting a 94 FWB, and have extras of many parts. Among the extras is a complete black steering column with wheel and key.

LMK if you need anything.

Jason.

i am looking for a rear window only without defrost. in good shape no scratches. i have a riv tan console with shifter and a grey blazer console with shifter and cable. $75.00n each

I'll be swapping over axles in my 1A2, so if anyone needs a 2.56 open rear it can be had for $40.
I have a black blazer floor console, no shifter. Its free to anyone who wants it.

96 Tan RMW
1) roadmaster front door panels in tan, please send me detailed pictures.
2) pass side door sill
3) rear cargo cover
4) pass side mirror, really just have to be a good shell, mine still works but mangled.
5) not rusted fender wells or minimum surface rust.
7) rear window handle lens LEFT side
rear driver side door panel light assembly

96 RubyRed RMW
1) rear cargo cover
2)roadmaster front door panels in ruby red, please send me detailed pictures.

I'll post my list of parts for sale/trade

Dear festers: I am looking for a smog pump for my TBI 350. Mines got a bad bearing and the state does a visual (usually) check, so can't delete. Can't believe i have to replace something so useless...

I have an ECM for 91-93 with Hypertech chip in it. It's what was in Shammoo before the swap over to TPI.

$40.00 for the ECM with the better chip

Send me a PM


edit 07/22/2011 ECM and chip still available

My own stuff for sale:

Cabin air filter for B & D body cars, comes with all brackets and hardware: $50.00 ea.

Brand new Autozone Duralast water pump: $70.00

MAF to PVC pipe adapters, rubber w/stainless band, looks nicer than a Fernco coupling: $15.00 ea

'94 coolant tank: $15.00

washer tank for a wagon: $15.00

Washer pumps: $5.00 ea.

Dk. Blue '95 Caprice wagon tail gate, no rust, small dent just above the trim piece in center. Comes w/ upper and lower hinges, lock mechanism, wire harness: $90.00

'94-95 Impala SS, stainless tail pipes from Pypes, never installed. These are the last 18"20" part of the tail pipes, NO OTA section: $20.00

Rear wagon hatch glass: $50.00

Rear wagon hatch glass gas struts w/electrical tabs: $15.00 pr.

Third brake light with latch. Metal latch/light mount was sand blasted, primed and painted. $35.00

Front upper control arms: $40.00

RMW vista shades w/surround: $25.00

OCC 3rd row tan cloth seats, excellent condition. $40.00

MOOG center link for a Caprice, brand new in box: $45.00

Blue interior pieces, tailgate cover, locking storage piece, spare tire piece: $15.00 for all

Rear grab handle light lenses: $15.00 pr

A/C delete pulley: $10.00

Emergency brake cables, new in boxes, left, right, middle. For '94 Buick RMW, I'm sure it fits all our wagons: $30.00

Fleetwood electric fan: Free

Wagon rear wheel well s.s. trim: $20.00 both sides

'93 cruise control/wiper stalk, beige: $10.00

Never mind

1. 1 x OEM factory ruby red riviera centre console. Includes shifter. Does NOT have CD holder. Pulled from a 95 riv. Nice condition, but the little ash-tray face plate and the ash tray itself got damaged in transit. Not too hard to repair. Only took photos of the damage, the body of the console is in great shape. $40 OBO: Whatever it takes to get it out of my garage;





2. 1 x 1994 OBD 1 PCM. Order a tune from pcmforless ($50) during his GP at ISSF and I'll upload it for free. $40;
3. 1 x 3" stock B-body LT1 MAF, 119000 km. $20;
4. pair of Stock 94 B-body exhaust manifolds. 119000 km. $20; and
5. 1 x autodimming rearview mirror w/ maplights from 1994 RMW

I found some Buick logo'd blankets. They cover the cargo area when the back (middle) seat is up. They are black vinyl with a flees like underside. I found these a at Ollie's store in Shamokin Dam, PA. I can pick them up on the way to the fest if anyone wants one.

On tailgate.....


half in the car....


folded up.....


folded in half.....


The cost $10 each plus tax.

PM to you.

nick

BigBlackBeaSSt wrote:

folded in half.....


The cost $10 each plus tax.

Is the logo embroidered or a sticker?

Nick

embroidered

I'll take one of the blankets Tim.

BigBlackBeaSSt wrote:

embroidered

excellent!!

did you get the PM i sent ??

I,d like 5 please,. let me know for paypal,?
thanks
Nick

If anyone is interested in a MINT MINT set of '95-96 Roadmaster rims, center caps and original / good shape tires for $250, please send me a PM. I was going to put them on my '94 but am now toying with having my '94 wheels stripped and powdercoated.

I will post pics soon. These wheels are mint.

ALSO - have a set of black American Racing AR-767 rims without center caps. They currently have Yokohama 245/60R15s on them. They are clean but not gorgeous. I want them gone. $150.

I'm still looking for a set of NICE Buick Road wheels, I don't have a lot of cash, but I do have a set of OZ Novas to trade + cash on your part, for the right set. I'd like the 7" wide rims, hard to find, but that's what I'm looking for.

Jerrod, does your Dad still have the rims he was trying to sell at WF in '09?

Anyone coming to WF near this guy?
http://worcester.craigslist.org/pts/2475091173.html

Mike

Mike, JaySS is pretty close.

Tom C.

200OZ wrote:

I'm still looking for a set of NICE Buick Road wheels, I don't have a lot of cash, but I do have a set of OZ Novas to trade + cash on your part, for the right set. I'd like the 7" wide rims, hard to find, but that's what I'm looking for.

Jerrod, does your Dad still have the rims he was trying to sell at WF in '09?

Anyone coming to WF near this guy?
http://worcester.craigslist.org/pts/2475091173.html

Mike

Im about 40 minutes from Charlton. PM me, I can look on weekends and Mondays.

200OZ wrote:

I'm still looking for a set of NICE Buick Road wheels, I don't have a lot of cash, but I do have a set of OZ Novas to trade + cash on your part, for the right set. I'd like the 7" wide rims, hard to find, but that's what I'm looking for.

Jerrod, does your Dad still have the rims he was trying to sell at WF in '09?

Anyone coming to WF near this guy?
http://worcester.craigslist.org/pts/2475091173.html

Mike

I will just bring a few to the fest. Whom ever wants one can pay for it there. So far $11 ea covers it.

I think he has some Buick Rims left but 6" ones.

T&M has finished their first batch of replacement heater restrictors. As most everyone with an LT1 car knows, the factory plastic units do become brittle over time and many eventually fail by breaking where the hose barb meets the main body. These new replacements are machined from solid aluminum stock and black anodized for protection. There is a reduced diameter portion inside the middle section to reduce the coolant pressure to the heater core, as was the purpose of the original part.





They are going to be sold on-line for about 25.00 plus whatever shipping & Paypal works out to. That should compare quite favorably with what GM is getting for the replacement units. I will have several available @ Wagonfest for your inspection. If anyone wants one right away, they may be purchased there for an introductory price of $25.00 each while supplies last.

- J

Jay,

Will that be the price @ WF?

Tim

BigBlackBeaSSt wrote:

Jay,

Will that be the price @ WF?

Tim

I'm going to guess 25 bucks:

Quote :

they may be purchased there for an introductory price of $25.00 each

Thanks Jay.........

Mike that wont work again!
Jim

I'm not kidding, If I found the right set, I'd move the OZs, unless of course I find some dirt cheap Buick road wheels locally.

Mike

JaySS wrote:

T&M has finished their first batch of replacement heater restrictors. As most everyone with an LT1 car knows, the factory plastic units do become brittle over time and many eventually fail by breaking where the hose barb meets the main body. These new replacements are machined from solid aluminum stock and black anodized for protection. There is a reduced diameter portion inside the middle section to reduce the coolant pressure to the heater core, as was the purpose of the original part.

I was thinking how awesome an aluminum or brass replacement would be back when I built my brass T. I'll be ordering these for sure.

updated my parts list.......

I have a set of 15x8.5 Alum. American racing / Centerline rims,.. won't fit the wagons,.. but will fit some of the impala's or caprices. The back spacing is like 3-1/2 i think. I haven't dismounted them yet, but I will to get better measurment before next week. So bare with me. I tucked them up under my wagon and I could barely put a paint stick between the lip and tire. Asking $400 for them. Rims only no tires. I also have a Fire power plasma cutter that I bought for $1300 awhile ago, and works excellent asking $375 for it.

David, I'll take that S10 console. Save me from having to hit the boneyard!

Tim, I'll take one of those blankets.

Jay, I'll take one of those restrictors.

All... I STILL need a good non-limited ruby red cloth passenger seat and LT1 rear seat. And a good -any color- door handle surround with "Concert Sound" please!

I could also use the quarter panel wide aluminum trim if it's in minty shape. Both sides.

Also looking a charcoal cloth GTP COUPE front seats.

Thanks!

The console is yours Bill, I'll bring it to the fest.

Anyone want a home plate? They are perfect for throwing sway!

If anybody is interested in guitars, PM me. I have a rare vintage Penco acoustic and also an electric (Greg Bennett Torino (Gibson SG copy) with some upgrades for sale.

Joel

Maybe we should organize a baseball game where every base is "home plate".

I actually heard somewhere recently that homeplate is there partially to compensate for the tiny plenum the LT1 has. If that's the case, it might be wise to put it back on...

Couple more things I have for sale:

1991 9C1 blue vinyl rear bench skins. Great shape. No rips/tears/ etc. Asking $35, make me an offer

4 N97's WITH tires, not great tread. Best just to replace them (One tire has some paint overspray on it). Includes center caps and bolts. Asking $200. some scrapes on each rim where the trim rings attach. With trim rings, $225. If you're local I can also repaint and/or prime them for an additional cost after WF. Will also trade these for a set of clean or pretty decent 5x5 chevy rally rims.