Wagonfest 2011 Parts For Sale - Wanted - Trade Thread

I have a set of C5 wagon wheels, ALL 17x8.5s. Do come with tires. Two are good, two are worn on the inside edge (way too much negative camber). Two are as clean as the pics below, and two are a little more "worn." You will need 2" adapters to run these, and they are the 5x4.75" bolt pattern, just so you know. Two have tire pressure sensors in them. $250.

Representative pic:
[img][/img]

Made a complete list, can be seen on page 5.

Lynol wrote:

Dear festers: I am looking for a smog pump for my TBI 350. Mines got a bad bearing and the state does a visual (usually) check, so can't delete. Can't believe i have to replace something so useless...

You don't need the pump if you get the GM delete label!

GM pt# 12569123

rkmdogs wrote:

Lynol wrote:

Dear festers: I am looking for a smog pump for my TBI 350. Mines got a bad bearing and the state does a visual (usually) check, so can't delete. Can't believe i have to replace something so useless...

You don't need the pump if you get the GM delete label!

GM pt# 12569123

This is true. There is a TSB for the smog pump. Thou that might only apply to the LT1 cars.

I believe the Air pump TSB was for 95 / 96 cars.

Anyone have a drivers side rear vent window with the hinges still attached available? Mine has detached again. I will pay cash!

I have a bunch of engine accessories and intakes and more random crap than I care to think about. LMK if you want anything. All is best offer!

i have a 94 caprice wagon and i need the chrome rocker trim that is on the quarter panel drivers side. it is the little pc in front of the rear tire. mine turned white all around the screw hole and fell apart. i also have parts for sale i can bring if someone wants them. they are listed in the parts for sale section. if you have the trim pls pm me thanks john

I also have the belt line trim off my 95 LDM caprice, complete except for the rear corners. Good for painting. Make me an offer.

Couple parts I am looking for:
LT1 dipstick (yellow handle).
left and right cornering lights with holes for lights.
Kodak Z885 digital camera. 8MP, uses AA's and SD cards. $30
Clear factory style DS corner (looks oem except for no orange part) $10

Also have some Nos parts for a 65 Chevelle wagon if anyone might be interested. I bought these for my 65 Wagon but no longer am going to use them I paid $775 for the complete set, which includes Grille hood molding and two lower grille trim piese's. I would like to get $500 at the fest if anyone is interested I would bring them.

I also want a tan rear tail gate panel for my 93. I just messed mine up the other day doing a favor for a friend.

RMW grille in "driver" condition. No cracks; chrome is worn but not shot. $35.
OCC grille - LAB. Very good condition. These things are rare, Olds emblem is in good shape, no idea what it's worth so $45 and it's yours.
OCC cargo cover - "TBI blue" - mint, with brackets - $50.
DCM cargo cover. Missing the rubber donuts, has a little paint overspray on it. Will need a little elbow grease. With brackets - $25.
OCC center cap for aluminum rim in excellent shape - red logo in center. $20.

lakeffect wrote:

Maybe we should organize a baseball game where every base is "home plate".

Who's on first?

Added pictures of the seats/console to the original post.

Anyone have a red DS door panel for a custom cruiser? Mine is falling apart at an alarming rate.

sherlock9c1 wrote:

RMW grille in "driver" condition. No cracks; chrome is worn but not shot. $35.
OCC grille - LAB. Very good condition. These things are rare, Olds emblem is in good shape, no idea what it's worth so $45 and it's yours.
OCC cargo cover - "TBI blue" - mint, with brackets - $50.
DCM cargo cover. Missing the rubber donuts, has a little paint overspray on it. Will need a little elbow grease. With brackets - $25.
OCC center cap for aluminum rim in excellent shape - red logo in center. $20.

Joel, what color is the emblem on that OCC grille? If the chrome is good and it's a red ('92) emblem, I'll take it.

Lynol wrote:

Joel, what color is the emblem on that OCC grille? If the chrome is good and it's a red ('92) emblem, I'll take it.

It is as you described.

ATTN Everyone: if you see something you're interested in, it's best if you just PM the seller so we don't clutter up this thread.

BigBlackBeaSSt wrote:

I found some Buick logo'd blankets. They cover the cargo area when the back (middle) seat is up. They are black vinyl with a flees like underside. I found these a at Ollie's store in Shamokin Dam, PA. I can pick them up on the way to the fest if anyone wants one.

On tailgate.....


half in the car....


folded up.....


folded in half.....


The cost $10 each plus tax.

The wife got to another Ollie's and picked up another 6 or so of the buick and found two variations of the Chevy. She is getting 5 of those for the fest.

Tim

(SALE PENDING) All new rear sway bar set up for the wagons using a New Ford sway bar. I bought it all and just never put it on. $90 at the fest if your interested. You need to buy the 3 inch clamps, I have the greaseable bushings and new poly links for it.

Tim I think I iwll tkae a mat at the fest if you have one left.

Pics of the Chevy ones?

Theres a whole bunch of those mats at the Ollies here too. Chevy, Buick Golf, Saturn, Kawasaki, and I think Pontiac. Tim's picture looks Blue but they are actually black. The other side is "microfur." The Buick ones had either black, white, or dark red fur. I don't think I'll be able to get there before the fest, though.

edit: can no longer attend WF

I'm leaning more and more towards parting my wagon. Would anyone be interested in a set of OZ Nova Wheels ?

2x 18x10" rears; and
2x 18x8" fronts.

$750

They are the correct 5x5 bolt pattern, not the re-drilled ones from the GP. The set comes with all 4 centrecaps. Please understand an 18x10" wheel requires a 275mm wide tire. I bought a set of 4 new 285/40ZR17s from discount tire that I am picking up at WF that I would be glad to sell at cost ($724)

since I have to cross the border, I'm not going to bring them unless I can get a confirmed buyer before going.

I can email pics to interested members. PM me your email.

edit: can no longer attend WF

Stingroo wrote:

Pics of the Chevy ones?

Sorry no time for pictures between now and the fest. Hit me up after, I will try to get pics at the fest.

200OZ wrote:

I'm still looking for a set of NICE Buick Road wheels.

Jerrod, does your Dad still have the rims he was trying to sell at WF in '09?

Mike

Mike this is what he has The one with center caps pictured he is asking $200 for them but they are the older rims 1968 and the other ones (with tape over the holes) are the 76'-up rims only 6" but still in descent shape, he is asking $460 with brand new center caps. Take $160 off if you don't want the center caps. Also I didn't have time to wash them off but will when I get back so I'll post updated pix's tonight. Gotta go.

I have an LT1 dual electric cooling setup if anyone's interested. Includes: both fans with harness, radiator, brackets and bolts, upper plastic shroud and the underhood fuse block.

Asking $100 for everything, make me an offer. I'd prefer payment in advance so I know I won't be bringing it home with me.

This pic isn't showing everything listed but you can see the fuse block and where it's clipped.
https://2img.net/h/i159.photobucket.com/albums/t136/dbeasst/partspics/lt1fans.jpg

Chevy Racing - Yellow fleece liner




Chevy with Bowtie - Yellow fleece liner




Buick with green (3), white (4) and orange tiger stripe (2) fleece!!

Can I dibs a tiger-stripe one?

did you grab 5 buick ones for me?

Nick

Wow, quite a stash. I'd like to nab one if there are any left.

phantom 309 wrote:

did you grab 5 buick ones for me?

Nick

I should have enough nick.

DBeaSSt wrote:

Wow, quite a stash. I'd like to nab one if there are any left.

LMK if you want one so I make sure to buy enough. The are $11 each with tax.

jasonlachapelle wrote:

edit: can no longer attend WF

I'm leaning more and more towards parting my wagon. Would anyone be interested in a set of OZ Nova Wheels ?

2x 18x10" rears; and
2x 18x8" fronts.

$750

They are the correct 5x5 bolt pattern, not the re-drilled ones from the GP. The set comes with all 4 centrecaps. Please understand an 18x10" wheel requires a 275mm wide tire. I bought a set of 4 new 285/40ZR17s from discount tire that I am picking up at WF that I would be glad to sell at cost ($724)

since I have to cross the border, I'm not going to bring them unless I can get a confirmed buyer before going.

I can email pics to interested members. PM me your email.

edit: can no longer attend WF

So I got a John Deere mower chassis with not place to put it! You got your buddy's number?

Tim

Used '95 Impala SS steering box. From the south, rust free. Has a leak around the pitman shaft area. Not sure how bad - bought this box, decided I don't have time to mess with it. $40 and it's yours.

Mechanical Fan Delete and NEW Innovations Wiring Harness. $85 for the set up w/o wiring harness directions though. Also fans came out of 94 Roadmaster and I forgot to take off top radiator shround when I took the fans out. Lakeffect said he might have top plate if anyone is interested. Also I just asked Brokecello if he still had his directions for the kit he installed. If not I'm sure you could get a new set from innovations.

Here is my summarized giant list:

Parting out my 96 9C1 with tan interior. The body is shot but it has a lot of accessories on it.
* 12way Bonnies with blazer center console with control molded into it. Front seats are pretty worn, the rear is good. Driver side has aftermarket heater elements installed. $250



* Clear/Smoke lens tail light with reflective tape mod and the middle bulb upgrade. $100
Hack's Impala trunk kit has storage compartments on both sides. Stock trunk carpet, probably will need good cleaning (they cleanup easy), here is the lionk for the trunk kit $250
* Tan roadmaster lit visors

Wagon parts:
* Chrome trim any piece 25$. The one piece with black rubber has the black rubber screwed on from the back. Tailgate molding is gone.
* A set of black rubber molding for a RMW, missing one on the driver side 15$








91 wagon parts:

* ported and rebuilt TBI with new TPS 50$
* Caddy intake with PVC pipe painted black Summit cone filter 50$
* dash bezel and 9C1 cluster wired and ready for installation. The bezel has couple of screw holes from CB mounting (tach, temp, oil and digital speedometer) will include oil pressure sensor (0-80psi) 80$


Caprice/Impala parts:

* Passenger side power seat control 10$


* Brand new aftermarket Caprice grille 20$ ea (have 6 available)
Brand new aftermarket headlights (with bulbs) 2 of RH 20$ ea
Brand new aftermarket corner lights (have a cover hole for turn illumination 3 of RH and 5 of LH 10$ ea























* Brand new aftermarket rear bumper support 30$
* Brand new GM bumper absorbers ACD#509-300 20$ each (have 2 available)














* Brand new GM hood strut #1010-0921 $15




* 1 3rd brake light housing 10
* 7 Pass side windshield A-pillar, blue (no hole some light blue some dark blue) 10

*Door arm rest
1 rear, right, brand new (blue) 15$
1 rear, right (burgundy) 10$
1 rear, left (burgundy) 10$

* Set of ARP head sutuds http://www.summitracing.com/parts/ARP-134-4001
Used on initial build up but had to go with bolts instead 50$ Spoken for

* Power performance motorsports http://www.proforged.com/ super duty lower ball joints K-615T 9/16" 30$

* LT1 iron heads heads 50$

* bfg drag radials mounted on steel police steel rims, got some life left in them 40$

* 91-93 tail light lenses separated from buckets. The left side lens is good but has scratches on outside and needs to be sanded/painted. The right side needs same treatments but one of the corners is chipped and has cracks in the backup lens, that is why there are two lenses, one of them is a donor of the backup lens. These will come with buckets that need to be painted but structurally sound. Also included is the trim set. 40$ for the package (this is a project for someone)
91-93 Tail lights trim set 20$

Just wanted to make mention - the tires that Jason LaChapelle is selling are 285/40ZR18s, not 17s, and they are GOODYEAR EAGLE F1 SUPERCAR tires. That's why they are $724. They are gorgeous.

I was looking through my parts and found 2 of rear window handle lenses for the RIGHT side, if someone has a LEFT one we can do an even trade. What do these things go for anyway?

I'm still looking for:
96 Tan RMW
1) roadmaster front door panels in tan in good shape
2) pass side door sill
3) rear cargo cover
4) pass side mirror, really just have to be a good shell, mine still works but mangled.
5) not rusted fender wells or minimum surface rust.
7) rear window handle lens LEFT side
8 ) rear driver side door panel light assembly

96 RubyRed RMW
1) rear cargo cover
2) roadmaster front door panels in ruby red in good shape
3) roof rack back insert (see picture)

Quote :

So I got a John Deere mower chassis with not place to put it! You got your buddy's number?

Tim

I'm on vacation with no internet (at the public library now) and no phone.

If anyone can get this close to Ottawa, I would appreciate it.

Jason.

Updated my list, I need to make room for my kids bikes in the garage, make an offer.

Mike

Have a set (2) of new rear Eibach springs for a b body sedan. Fairly heavy, so a pick up might be best as opposed to shipping. $75