WagonFest 2013 NY - Official Parts Swap Thread

Is it too soon to look into a parts swap thread?  Or if this doesn't follow the format, mods are welcome to delete and/or start an offcial one.

Memorial day weekend is the sale weekend at the junkyards I hit, which is when I tend to stock up on items.  So if there is something you are looking for, I'll do what I can to find it.  

(edited by Dave... It just became the official parts swap thread)

No problem Cory, Now is a good time to get it started.

Dave

Grey box caprice steering wheel.

I haven't seen a box Caprice W/ grey guts in the yards, yet.

most of the parts seen in my garage thread are up for grabs let me know what you need/want and I'll bring em to the fest

https://gmlongroof.4umer.com/t8385-my-poor-over-filled-garage

Roadmaster Sedan fiberglass front bumper support. Mint condition, no cracks or busted bolt holes. Studs in good shape.

B-body radiator, no end tanks (protect your transmission and engine!). Used but pressure tested good. Came off a '94-96 9C1. $50 or make me an offer.

-Ruby red carpet cover for dash
-dual electric fan rad. (fans are toast)

I'm looking for a wire hub cap and two center chevy emblem caps for my 94 wagon. Also, I need a light blue tailgate interior handle.

Thanks
Randy

yakko wrote:

I'm looking for a wire hub cap and two center chevy emblem caps for my 94 wagon. Also, I need a light blue tailgate interior handle.

Thanks
Randy

I have a full set of wire hubcaps and like 6 centers.

Anybody got a spare center air dam for sale?

I'm looking for the lower dash piece on the drivers side for a Fleetwood in light tan.

FS - local junkyard has a set of black Bonneville 6-way leathers in near mint condition with tracks, front and rear. Yours for $125. Today is 5/26 and I need to know within 7 days if you are interested.

sherlock9c1 wrote:

Anybody got a spare center air dam for sale?

I got a few kicking about

benn wrote:

-Ruby red carpet cover for dash
-dual electric fan rad. (fans are toast)

the above is stuff i have to offer.

i really want to start gathering T56 swap stuff if anyone has anything....

I have a brand new Caprice grille. Never been used. Any interest. Not entirely sure what' it's worth.

-
I have some pieces I won’t be using. Here’s what I have to part with so far:  

1.     I have (6)  15” x 8" WS6 Trans Am snowflakes for sale. (4) of them are bare aluminum (plain finish)

One is gold-centered and usable as is, the last is gray-centered and has some curb rash, but very much repairable. They are 5 on 4.75" bolt pattern (Boxie sedan - except 9C1) and IIRC they are zero offset - which works out to be something like 4.5" backspacing.

Complete with like-new lugnuts (they are specific to this wheel) and a set of a set of nearly NOS (meaning I don't have the boxes they came in after they were installed to see what they looked like and then placed in storage back in 1989) red-winged caps are included.

Plain finish:





Gold centered:



Gray centered (hard to get pics of the curbrash):







And caps:



Use on another project or a Pontiac clone (as if anyone would do such a thing).

I would think $300.00 delivered to WFNY is exceptionally fair for everything.

2.     (3) 1991 or 1992 Corvette 17 x 9.5 sawblade style wheels. Actual pic attached::



Two lefts & one right - as seen in the photo. Add a fourth & some cheap adapters and you’ll have a nice set OCC wheels for short money. $100.00 delivered to WFNY.

3.     2 pairs of Diamante headlights in excellent condition - another mod I am not going to get to - $50.00/pair.





4.     3 complete 9C1 steering columns - one in beige, two in blue - don’t need them anymore - $20.00 each.



5.     Brand new G-body 4L80E tubular crossmember from Clear Image/Bowtie Overdrives - $100.00.

6.     Camaro cluster - should be from a low tire option V8 car - so 110 speedo - $40.00





7.     A really nice set of LT1 vavle covers - $15.00 pair



Open to interesting trades. More as I think of it.

- J
-

Full set of 4 black 15x8 suburban/truck metal rims with 9c1 center caps and screws.  Two are straight and two have very slight wobbles (I stuck them on the rear and drove 40k on them with no vibration).  $150.

Nope he can't Pat! So I'll take them. Dibs if Pat passes.

Partial list:
rear DGGM WB4 doors with dirty tan door panels -$20 each
Front Tan 94-96 tan passenger door panel, no cracks, wood trim fell off-$40
Rear 94-96 Red door panels (wagon) in good shape -$40 each
Tan 94 RM dash face, one vent on right missing-$15
A few rear vent windows without the hinges -FREE
Power seat rails -$20 each
Misc tan and blue interior parts
Black fleetwood steering wheel with bag-$20
94-96 RM instrument cluster -$25
Blue 91-93 RM front bench seats with console-$60 for pair
Caprice wagon rear springs -$15
94-96 Caprice cloth rear lower seat cushion great shape (seat always folded down)-$30

More to come....

I'll take that steering wheel if the leather is in decent shape.

buickestate wrote:

can you machine them with 5 on 5 lug pattern?

Anything is possible, but in this case the factory lug holes are oversized compared to today's wheels so we would be locked into using the oversized steel inserts (if they are in fact large enough to do the job) at like $2.00 & some change per hole, plus the time to put them in. So the cost would add up quick.

And drilling a second set in the 5 on 5" pattern between the existing holes (as we did on Doug's BBS wheels) is not really an option as the wheel is relieved on the back side in those areas. Which is to say that there is insufficient material to ensure a safe modification.

In this case about the only other way to make them a fit short of welding & redrilling would be to alter the car to 5 on 4.75" pattern, not something inexpensive to do either. 

So I'm thinking that for all intents and purposes the answer is no. Thanks for the interest though.

1993 Roady-man wrote:

Nope he can't Pat! So I'll take them. Dibs if Pat passes.

Jarrod, I assuming Pat will not want them if he can't use them, so if that is the case, they are yours.

- J
-

Ok if it was me,... and think Pat might be thinking this way, I would drill the other spots and leave the original holes alone. You could probably make some kind of plug for the original holes and paint them to match. They would look great on Pats Wagon.

1993 Roady-man wrote:

Ok if it was me,... and think Pat might be thinking this way, I would drill the other spots and leave the original holes alone. You could probably make some kind of plug for the original holes and paint them to match. They would look great on Pats Wagon.

Sorry perhaps I wasn't clear, maybe this will help. Though not the same wheel, they look like this one does on the backside, so there isn't enough metal to ensure the lug area is properly supported if a new hole is drilled.

IMHO it's just not worth taking a chance and have a wheel fail.



I agree, they would look great, and someone else may be willing to do it that way, but it won't be me.

- J
-

It seem that it would be easier to have your frt. rotors, rear axles/drums re-drilled with the 5on4.75 pattern for the wheels. Late s80s to early 90's Camaro 1LE front rotors could be used instead of re-drilling the rotors, but the 1LE rotors don't have the ABS reluctor, so no ABS.

Mike

I wasn't expecting it be that much of a deficit on the backside. I was trying to remember what they looked like cus I had some not to long ago but not 8" So my bad -J, I guess I need pix's LOL!

Part out thread here: https://gmlongroof.4umer.com/t8719-95-wb4-rmw-partout-ruby-red-int-178k-miles

Any interest in a partial set of (LT1) blue door panels?  Only have the two rears (for wagon) and right front.  I have no need for them anymore but have hesitated to toss them.

mike i might be interested in the door panels. what year are they from?

mtrhead79 wrote:

mike i might be interested in the door panels. what year are they from?

They are from a '94 RMW.

Since we're having to constantly weed through pages of unrelated car topics across multiple forums, perhaps it would be appropriate to add some non-GM / non-wagon parts just in case someone out there could use them (Sorry, no unopened cases of satin black spray bombs on hand just now).

(4) Speedline Corse 18" x 10" real magnesium wheels, brand new with lightly used Pirelli 285/30ZR-18 P-Zero Rossa's.

5 on 120 mm - read: BMW - bolt pattern.

Price: Figure about 4X what somebody paid for their latest fail (translation: expensive).









Enjoy...

- J

mike i will pass on dr panels. i was thinking they where caprice

Set of '95 Factory Service Manuals. Very good condition. $50.

sherlock9c1 wrote:

Set of '95 Factory Service Manuals.  Very good condition.  $50.  

 hmmmm

Few more items:

Front blue bench from 93 RMW, good shape with console-$60
Full set of Impala SS seats, good condition, some rips on driver's seat-$350
Caprice wagon DS rear quarter glass (long window)-$60
Bunch of vent windows with broken hinges- FREE
DCM RMW rear bumper, has glue where stainless trim goes-$30

If anyone wants pics I can get some.

Just throwing this out there if any '94 guy is interested in a known good spare trans:

'94 4L60E out of my RMW with 154k on it.  Runs good, shifts good.  I only pulled it because Reverse got soft, and I will correct this by installing brand new lo-reverse clutches, a '96 manual valve with modified Reverse exhaust (corrects the '93-95 design flaw) so you'll never have the problem.  It also has a TransGo SK shift kit, and I'll install a brand new Sonnax boost valve, all for $300.   Can add upgraded sunshell and refreshed pump with all new seals for additional $.

Need to know by EDIT - July 22nd if you're interested so I can have it ready for you.

sherlock9c1 wrote:

Just throwing this out there if any '94 guy is interested in a known good spare trans:

'94 4L60E out of my RMW with 154k on it.  Runs good, shifts good.  I only pulled it because Reverse got soft, and I will correct this by installing brand new lo-reverse clutches, a '96 manual valve with modified Reverse exhaust (corrects the '93-95 design flaw) so you'll never have the problem.  It also has a TransGo SK shift kit, and I'll install a brand new Sonnax boost valve, all for $300.   Can add upgraded sunshell and refreshed pump with all new seals for additional $.

Need to know by June 22nd if you're interested so I can have it ready for you.

June 22 is long gone! Did you mean July?

Randy

Yes, July 22nd.  

I have several spare '95 and '96 Cruise Control actuators, all tested and working.  Cheaper than disassembling and trying to fix the internal gear when it strips (been there tried that).  $20 apiece.

Also have a couple of spare HVAC blower motor modules, with clean contacts and tested working. $20 apiece.

if anyone coming to the wagon fest has a blue door panel for a 95 roadmaster driver door please bring it along if its for sale. john

I have a few bleeder valves available, but I am on the fence to re-order them. I sell them for $10 at the show. If I have enough interest (7 or I will order a new batch before WagonFest.

I've got a spare 94-95 PCM.  Tested and working; can load a tune of your choice if you let me know ahead of time.  $50

If there is any interest I can bring more of these again and sell direct at WF for $25.00 each.





Normally more on eBay:

http://www.ebay.com/itm/BILLET-ALUMINUM-HEATER-WATER-FLOW-CONTROL-VALVE-ASSEMBLY-/300932119313?pt=Motors_Car_Truck_Parts_Accessories&hash=item4610f3bb11

Not mine, so I'm not making anything on these, but I'll do it to save the people that have been wanting one a few bucks.

Speak up here so I know how many that need to be set aside.

- J

BigBlackBeaSSt wrote:

I have a few bleeder valves available, but I am on the fence to re-order them.  I sell them for $10 at the show.  If I have enough interest (7 or 8)I will order a new batch before WagonFest.  

Put me down for 2 Tim. I just have to remember to actually get them from you this year  

JaySS wrote:

If there is any interest I can bring more of these again and sell direct at WF for $25.00 each.





Normally more on eBay:

http://www.ebay.com/itm/BILLET-ALUMINUM-HEATER-WATER-FLOW-CONTROL-VALVE-ASSEMBLY-/300932119313?pt=Motors_Car_Truck_Parts_Accessories&hash=item4610f3bb11

Not mine, so I'm not making anything on these, but I'll do it to save the people that have been wanting one a few bucks.

Speak up here so I know how many that need to be set aside.

- J

I'll take one Jay.

Anyone have a rear wiper arm?

Also looking for a Drivers side vent window.

YachtDriver wrote:

Anyone have a rear wiper arm?

Also looking for a Drivers side vent window.

I know I have a rear vent window. Will send PM.

YachtDriver wrote:

Anyone have a rear wiper arm?

Also looking for a Drivers side vent window.

Pretty sure I have a rear wiper arm I can bring. sounds like Tim got your vent window.

DBeaSSt wrote:

YachtDriver wrote:

Anyone have a rear wiper arm?

Also looking for a Drivers side vent window.

Pretty sure I have a rear wiper arm I can bring.  sounds like Tim got your vent window.

I actually have a line on the Rear wiper arm. However, It's a discontinued part so it's not a bad idea to have one banging around.

As far as the vent window goes I am really looking for one with the hinges still attached. Thanks!

JaySS wrote:

If there is any interest I can bring more of these again and sell direct at WF for $25.00 each.





Normally more on eBay:

http://www.ebay.com/itm/BILLET-ALUMINUM-HEATER-WATER-FLOW-CONTROL-VALVE-ASSEMBLY-/300932119313?pt=Motors_Car_Truck_Parts_Accessories&hash=item4610f3bb11

Not mine, so I'm not making anything on these, but I'll do it to save the people that have been wanting one a few bucks.

Speak up here so I know how many that need to be set aside.

- J

yes please