GM Longroof Forum
Would you like to react to this message? Create an account in a few clicks or log in to continue.



 
HomeHome  PortalPortal  GalleryGallery  Latest imagesLatest images  SearchSearch  RegisterRegister  Log in  

 

 Quick disconet fuel line fittings

Go down 
5 posters
AuthorMessage
GMjonn

GMjonn


Posts : 166
Join date : 2012-07-25
Age : 63
Location : Dacula Georgia

Quick disconet fuel line fittings Empty
PostSubject: Quick disconet fuel line fittings   Quick disconet fuel line fittings Icon_minitimeFri Jun 10, 2016 4:34 pm

So.... Doing a fuel pump...again.... Cant get one of the fittings to release. The middle one released no problem, when you are under the car looking up, the one on your right I cant get to release. Are they both the same size? Do I need a smaller release tool to slide in?
Back to top Go down
silverfox103
Moderator
silverfox103


Posts : 3344
Join date : 2008-11-05
Age : 75
Location : Littleton, NH & St. Simons, GA

Quick disconet fuel line fittings Empty
PostSubject: Re: Quick disconet fuel line fittings   Quick disconet fuel line fittings Icon_minitimeFri Jun 10, 2016 6:29 pm

It's been probably 8 years since I have done that, and I very well could be wrong, but I believe they are two different sizes. I'm sure someone will be along to agree with me or correct me.

Tom
Back to top Go down
Fred Kiehl

Fred Kiehl


Posts : 7159
Join date : 2009-11-13
Age : 75
Location : Largo, FL 33774

Quick disconet fuel line fittings Empty
PostSubject: Re: Quick disconet fuel line fittings   Quick disconet fuel line fittings Icon_minitimeFri Jun 10, 2016 9:45 pm

They are different sizes. The return is smaller. If it has the white plastic clips (mine does), you have to push in on the exposed ends, and slide the hose off of the clip. If it has the metal clips, you need a tool. If you got one off, I am assuming that they are the white plastic clips. Sometimes they are reall buggers to get off. You may have some success if you push the lines toward each other before pushing the plastic ends in. The plastic may have a small groove in it, and will not release under tension. The 91-93 heater core hoses have similar "quick release" clips on them.
Back to top Go down
GMjonn

GMjonn


Posts : 166
Join date : 2012-07-25
Age : 63
Location : Dacula Georgia

Quick disconet fuel line fittings Empty
PostSubject: Re: Quick disconet fuel line fittings   Quick disconet fuel line fittings Icon_minitimeSat Jun 11, 2016 12:23 am

These are the ones that have the "inside" clips. you need to put the tool on the tube and slide it down inside the fitting to expand the metal tabs away from the lip on the tube. I went to the parts store and picked up a metal one, the other one is plastic. Hoping to be able to tap on the metal on to drive it in there to expand those tabs.
Back to top Go down
Fred Kiehl

Fred Kiehl


Posts : 7159
Join date : 2009-11-13
Age : 75
Location : Largo, FL 33774

Quick disconet fuel line fittings Empty
PostSubject: Re: Quick disconet fuel line fittings   Quick disconet fuel line fittings Icon_minitimeSat Jun 11, 2016 7:22 am

Try twisting them to get the O-ring to loosen on the line.
Back to top Go down
Sprocket

Sprocket


Posts : 6127
Join date : 2008-11-04
Location : Palm Beach County

Quick disconet fuel line fittings Empty
PostSubject: Re: Quick disconet fuel line fittings   Quick disconet fuel line fittings Icon_minitimeWed Jun 15, 2016 12:16 pm

I've always managed to get needle nose pliers to work for me...but I do have a set of the metal ones, they work too.
Back to top Go down
MalibuSSwagon




Posts : 580
Join date : 2014-01-12
Location : NH

Quick disconet fuel line fittings Empty
PostSubject: Re: Quick disconet fuel line fittings   Quick disconet fuel line fittings Icon_minitimeWed Jun 15, 2016 1:09 pm

The metal tang one, you have to pull the fitting back (farther on) the line and then push the tool in for it to release. Sometimes they do get stuck however. I had no luck however and I just pulled the sender out of the tank with the lines still attached.
Back to top Go down
GMjonn

GMjonn


Posts : 166
Join date : 2012-07-25
Age : 63
Location : Dacula Georgia

Quick disconet fuel line fittings Empty
PostSubject: Re: Quick disconet fuel line fittings   Quick disconet fuel line fittings Icon_minitimeWed Jun 15, 2016 11:02 pm

Got it done. Went to the parts store and bought a metal sissor type rather than the round plastic disc type and tapped and tapped with a hammer, and twisted the fitting some and it finally popped off.
Back to top Go down
Sponsored content





Quick disconet fuel line fittings Empty
PostSubject: Re: Quick disconet fuel line fittings   Quick disconet fuel line fittings Icon_minitime

Back to top Go down
 
Quick disconet fuel line fittings
Back to top 
Page 1 of 1
 Similar topics
-
» Fuel line quick connects.
» Loosening brake line fittings
» Nylon fuel line snapped off in my hand where it meets connector at fuel rail
» Fuel Line Connector Dimensions
» Looking for fuel line

Permissions in this forum:You cannot reply to topics in this forum
GM Longroof Forum :: Longroof Tech :: Wagon General Discussion-
Jump to: