GM Longroof Forum
Would you like to react to this message? Create an account in a few clicks or log in to continue.



 
HomeHome  PortalPortal  GalleryGallery  Latest imagesLatest images  SearchSearch  RegisterRegister  Log in  

 

 Parting out 91 Olds Custom Cruiser rust free

Go down 
+10
Wagon Sleigher
udownwitk
ghetto wagon
Fred Kiehl
Cadet57
Andebe
Bert Slater
Sprocket
MalibuSSwagon
AzDon
14 posters
AuthorMessage
AzDon

AzDon


Posts : 359
Join date : 2011-08-05
Age : 68
Location : Lake Havasu, AZ

Parting out 91 Olds Custom Cruiser rust free Empty
PostSubject: Parting out 91 Olds Custom Cruiser rust free   Parting out 91 Olds Custom Cruiser rust free Icon_minitimeMon Feb 22, 2016 4:22 pm

Welll.... I'm to that point where I need to dismantle this OCC to get the drivetrain for my project van....
If anybody is needing any of the parts I won't be using, I'm entertaining committed offers. I've got most of the saddle tan interior trim already removed and I'll be pitching it in the next two weeks if nobody wants it.
Hood and left fender are perfect, right fender has small dent.... Bumpers, headlights good, one new taillight (right side) Doors are all perfect. All cladding trim is good, except right rear. floors are perfect as are left quarter and roof......Power driver seat base is fully operational
I am taking the drivetrain (including rear axle) and possibly the HVAC, lock solenoids, mirrors, stabilizer bar, gas tank and the floor above it, etc
I'm only going to have stuff available until I'm done stripping out the stuff I want, then it will be going to Pick-a-Part......

Parting out 91 Olds Custom Cruiser rust free Leftshot

Parting out 91 Olds Custom Cruiser rust free Blue-right-rear

Parting out 91 Olds Custom Cruiser rust free Blue-right-front
Back to top Go down
http://v-driveboat.com
MalibuSSwagon




Posts : 580
Join date : 2014-01-12
Location : NH

Parting out 91 Olds Custom Cruiser rust free Empty
PostSubject: Re: Parting out 91 Olds Custom Cruiser rust free   Parting out 91 Olds Custom Cruiser rust free Icon_minitimeMon Feb 22, 2016 5:46 pm

Aww man, if you weren't literally on the other side of the country from me, I'd buy the rest of the car..I'll look at my OCC but I don't think there's anything small I want.
Back to top Go down
Sprocket

Sprocket


Posts : 6141
Join date : 2008-11-04
Location : Palm Beach County

Parting out 91 Olds Custom Cruiser rust free Empty
PostSubject: Re: Parting out 91 Olds Custom Cruiser rust free   Parting out 91 Olds Custom Cruiser rust free Icon_minitimeMon Feb 22, 2016 7:09 pm

That front bumper cover and front wheel well trim will get you real money on the impala forum. Also the tail light as the roll pan crowd likes the longer tail housing.
Back to top Go down
Bert Slater

Bert Slater


Posts : 254
Join date : 2015-03-23
Location : Melrose Florida

Parting out 91 Olds Custom Cruiser rust free Empty
PostSubject: Re: Parting out 91 Olds Custom Cruiser rust free   Parting out 91 Olds Custom Cruiser rust free Icon_minitimeTue Feb 23, 2016 8:42 am

The carpeting, what shape is it in? Pics?
Back to top Go down
Andebe

Andebe


Posts : 3323
Join date : 2013-02-20
Age : 55
Location : Centerville, IN

Parting out 91 Olds Custom Cruiser rust free Empty
PostSubject: Re: Parting out 91 Olds Custom Cruiser rust free   Parting out 91 Olds Custom Cruiser rust free Icon_minitimeTue Feb 23, 2016 10:26 am

Sail panels?
Back to top Go down
Cadet57

Cadet57


Posts : 3047
Join date : 2010-04-13
Age : 37
Location : Chicopee, MA

Parting out 91 Olds Custom Cruiser rust free Empty
PostSubject: Re: Parting out 91 Olds Custom Cruiser rust free   Parting out 91 Olds Custom Cruiser rust free Icon_minitimeTue Feb 23, 2016 10:42 am

Cruise control wiring (underhood box to steering column)
Back to top Go down
Fred Kiehl

Fred Kiehl


Posts : 7290
Join date : 2009-11-13
Age : 76
Location : Largo, FL 33774

Parting out 91 Olds Custom Cruiser rust free Empty
PostSubject: Re: Parting out 91 Olds Custom Cruiser rust free   Parting out 91 Olds Custom Cruiser rust free Icon_minitimeTue Feb 23, 2016 9:53 pm

I am interested in the complete undamaged wiring harness for the engine. I need it pretty soon. I am currently attempting to work with a 92 harness, but they are not the same.
Back to top Go down
ghetto wagon




Posts : 16
Join date : 2010-04-25

Parting out 91 Olds Custom Cruiser rust free Empty
PostSubject: Re: Parting out 91 Olds Custom Cruiser rust free   Parting out 91 Olds Custom Cruiser rust free Icon_minitimeWed Feb 24, 2016 3:21 pm

It has the blue interior correct? Are most of the parts in good condition?
Back to top Go down
Fred Kiehl

Fred Kiehl


Posts : 7290
Join date : 2009-11-13
Age : 76
Location : Largo, FL 33774

Parting out 91 Olds Custom Cruiser rust free Empty
PostSubject: Re: Parting out 91 Olds Custom Cruiser rust free   Parting out 91 Olds Custom Cruiser rust free Icon_minitimeWed Feb 24, 2016 8:39 pm

ghetto wagon wrote:
It has the blue interior correct? Are most of the parts in good condition?

He stated saddle interior, that is also known as camel.
Back to top Go down
Bert Slater

Bert Slater


Posts : 254
Join date : 2015-03-23
Location : Melrose Florida

Parting out 91 Olds Custom Cruiser rust free Empty
PostSubject: Re: Parting out 91 Olds Custom Cruiser rust free   Parting out 91 Olds Custom Cruiser rust free Icon_minitimeWed Feb 24, 2016 9:39 pm

is this a "silent auction" where I guess people make offers and the seller does not respond?
Back to top Go down
Cadet57

Cadet57


Posts : 3047
Join date : 2010-04-13
Age : 37
Location : Chicopee, MA

Parting out 91 Olds Custom Cruiser rust free Empty
PostSubject: Re: Parting out 91 Olds Custom Cruiser rust free   Parting out 91 Olds Custom Cruiser rust free Icon_minitimeSun Feb 28, 2016 11:23 am

I know he's not on all the time. But I hope he comes back. I found more stuff I need for my 93 Laughing
Back to top Go down
AzDon

AzDon


Posts : 359
Join date : 2011-08-05
Age : 68
Location : Lake Havasu, AZ

Parting out 91 Olds Custom Cruiser rust free Empty
PostSubject: Re: Parting out 91 Olds Custom Cruiser rust free   Parting out 91 Olds Custom Cruiser rust free Icon_minitimeSun Feb 28, 2016 9:15 pm

Hmm, I'm not getting notifications for my own thread (imagine that!) Sorry for the delay.....I'll try to run down the whole list.... Most everything inside isn't worth the trouble as it's not in great shape. Grab lenses gone, Cruise supposedly works, but needs a TBI linkage fastener, I'm gonna be using the engine harness and ECM, Sail panels....my neighbor wanted the black ones for his RMW bad enough to break them off of there.... Couldn't wait for me to just spray paint them on his (which we had to do anyway).... Has an analog HVAC panel, Instrument panel- everything works except main odometer (stuck at 123,000 miles) Jack and lug wrench are gone. Back window is wiper damaged. Roofrack bar is gone.....
I probably should just list what is good:

Electric seat base and controls (driver side only) are good. Steering column and controls good, All four doors are perfect with good glass and cladding. Hood and left fender perfect (small dent in the top of the right fender) Inner fenders perfect (no rust on this car) Heater and AC cores worked perfectly, but look WAAYY buried (I'll hafta read up before attempting removal) Third row looks to have never been used (pleather) All but 1 seatbelt buckle are good. Has a complete set of RMW cast wheels and hubcaps with almost unused tires.... Black license light. Uncertain about the condition of the air-ride compressor. I have an unbroken RMW grille and secondary release handle. Overhead window is good. rear side windows are good. The spare tire well is good. Pillar trims have the typical broken fasteners, rear side panels are good, but the plastic stuff is going in the trash this week if there is no interest.... Door panels okay except drivers and wood trims are broken.... I'll have LOTS of interior fasteners, screws and clips available.... probably a lot of other stuff I'm forgetting....
Back to top Go down
http://v-driveboat.com
udownwitk

udownwitk


Posts : 82
Join date : 2013-12-06
Age : 38
Location : Athens Ga

Parting out 91 Olds Custom Cruiser rust free Empty
PostSubject: Re: Parting out 91 Olds Custom Cruiser rust free   Parting out 91 Olds Custom Cruiser rust free Icon_minitimeMon Feb 29, 2016 3:17 pm

would you ship the front bumper?
Back to top Go down
AzDon

AzDon


Posts : 359
Join date : 2011-08-05
Age : 68
Location : Lake Havasu, AZ

Parting out 91 Olds Custom Cruiser rust free Empty
PostSubject: Re: Parting out 91 Olds Custom Cruiser rust free   Parting out 91 Olds Custom Cruiser rust free Icon_minitimeMon Feb 29, 2016 7:50 pm

The bumper cover can be shipped loose if it's wrapped well and it doesn't weigh much.....Not sure if the size prevents regular UPS, but I do have UPS freight available..... Haven't a clue of the cost..... I'll take some good pics before I finish removing it tomorrow.....I don't have a chevy or olds grille to go with it....
Back to top Go down
http://v-driveboat.com
udownwitk

udownwitk


Posts : 82
Join date : 2013-12-06
Age : 38
Location : Athens Ga

Parting out 91 Olds Custom Cruiser rust free Empty
PostSubject: Re: Parting out 91 Olds Custom Cruiser rust free   Parting out 91 Olds Custom Cruiser rust free Icon_minitimeMon Feb 29, 2016 7:54 pm

AzDon wrote:
The bumper cover can be shipped loose if it's wrapped well and it doesn't weigh much.....Not sure if the size prevents regular UPS, but I do have UPS freight available..... Haven't a clue of the cost..... I'll take some good pics before I finish removing it tomorrow.....I don't have a chevy or olds grille to go with it....

thats fine i do not need a grille. just interested in the bumper itself.
Back to top Go down
Wagon Sleigher

Wagon Sleigher


Posts : 11
Join date : 2012-04-18
Age : 49
Location : Macon, GA

Parting out 91 Olds Custom Cruiser rust free Empty
PostSubject: Re: Parting out 91 Olds Custom Cruiser rust free   Parting out 91 Olds Custom Cruiser rust free Icon_minitimeSun Mar 06, 2016 11:19 pm

Please give me a quote for the little square knob that goes on the driver's side power seat control and The glove compartment latch. Thanks!!!
Back to top Go down
AzDon

AzDon


Posts : 359
Join date : 2011-08-05
Age : 68
Location : Lake Havasu, AZ

Parting out 91 Olds Custom Cruiser rust free Empty
PostSubject: Re: Parting out 91 Olds Custom Cruiser rust free   Parting out 91 Olds Custom Cruiser rust free Icon_minitimeMon Mar 07, 2016 9:38 am

Entire seat switch module for $20 Glove box latch is gone....
Back to top Go down
http://v-driveboat.com
AzDon

AzDon


Posts : 359
Join date : 2011-08-05
Age : 68
Location : Lake Havasu, AZ

Parting out 91 Olds Custom Cruiser rust free Empty
PostSubject: Re: Parting out 91 Olds Custom Cruiser rust free   Parting out 91 Olds Custom Cruiser rust free Icon_minitimeSat Mar 12, 2016 3:00 pm

Here is some pictures of some of the stuff I have gotten off the car so far....Right now, my focus is on getting the car dismembered and gone.......If there are any parts you are interested in, be sure to speak up  so I'll save them.....
I'm taking offers (that include the cost of proper packaging for shipment) now, but will not be completing sales or doing any shipping till I'm done stripping the car.Don't ask me what I want for the stuff, because I'll probably want too much and would rather sell it for a proper (fair and reasonable) price than to store or dispose of the stuff.... PLEASE SEND OFFERS!!


Parting out 91 Olds Custom Cruiser rust free OCC-bumper

Parting out 91 Olds Custom Cruiser rust free Buick-bumper

Parting out 91 Olds Custom Cruiser rust free Wagon-parts1

Rear compartment lid with keys, front wheel well trims (perfect condition) headlights, cornering lights, lower eyelids for headlights, RMW grille, perfect washer bottle and pumps (coolant bottle not pictured is also good!) Skylight surround with all fasteners intact!

Parting out 91 Olds Custom Cruiser rust free Arm-rest

Parting out 91 Olds Custom Cruiser rust free OCC-Hood

Parting out 91 Olds Custom Cruiser rust free Spoiler-splash-panels

Parting out 91 Olds Custom Cruiser rust free Left-inner-fender

Fenders and inner fenders are completely rust-free except for some surface rust below the battery tray... good battery tray also!
Back to top Go down
http://v-driveboat.com
AzDon

AzDon


Posts : 359
Join date : 2011-08-05
Age : 68
Location : Lake Havasu, AZ

Parting out 91 Olds Custom Cruiser rust free Empty
PostSubject: Re: Parting out 91 Olds Custom Cruiser rust free   Parting out 91 Olds Custom Cruiser rust free Icon_minitimeSun Mar 13, 2016 8:18 pm

AzDon wrote:
Entire seat switch module for $20 Glove box latch is gone....

Or make me an offer.....
Back to top Go down
http://v-driveboat.com
Bert Slater

Bert Slater


Posts : 254
Join date : 2015-03-23
Location : Melrose Florida

Parting out 91 Olds Custom Cruiser rust free Empty
PostSubject: Re: Parting out 91 Olds Custom Cruiser rust free   Parting out 91 Olds Custom Cruiser rust free Icon_minitimeMon Mar 14, 2016 10:25 am

sounds like glove box latch may still be avail... so glove box latch w/key... rear storage door and lock... plus lock and latch for 3rd seat/storage door for 60 bucks w/keys for all/same?... I need all three at same time from same car, thanks, bert
Back to top Go down
letrbuk

letrbuk


Posts : 9
Join date : 2016-01-22

Parting out 91 Olds Custom Cruiser rust free Empty
PostSubject: Re: Parting out 91 Olds Custom Cruiser rust free   Parting out 91 Olds Custom Cruiser rust free Icon_minitimeMon Mar 14, 2016 10:13 pm

Hi my name is Kevin I am looking for one rear bumper impact absorber. How much would you want for that shipped to 55741.
Back to top Go down
AzDon

AzDon


Posts : 359
Join date : 2011-08-05
Age : 68
Location : Lake Havasu, AZ

Parting out 91 Olds Custom Cruiser rust free Empty
PostSubject: Re: Parting out 91 Olds Custom Cruiser rust free   Parting out 91 Olds Custom Cruiser rust free Icon_minitimeTue Mar 15, 2016 5:50 pm

The glovebox latch was broken so I tossed the door..... I have the two from the rear with a key available that fits both...... $40 plus shipping?
Back to top Go down
http://v-driveboat.com
Guest
Guest




Parting out 91 Olds Custom Cruiser rust free Empty
PostSubject: Re: Parting out 91 Olds Custom Cruiser rust free   Parting out 91 Olds Custom Cruiser rust free Icon_minitimeWed Mar 16, 2016 2:57 pm

might be interested in cluster if its available and miles on it.
Back to top Go down
AzDon

AzDon


Posts : 359
Join date : 2011-08-05
Age : 68
Location : Lake Havasu, AZ

Parting out 91 Olds Custom Cruiser rust free Empty
PostSubject: Re: Parting out 91 Olds Custom Cruiser rust free   Parting out 91 Olds Custom Cruiser rust free Icon_minitimeWed Mar 16, 2016 4:53 pm

Everything on cluster works EXCEPT the odometer, which stopped working at 123,000 miles.....
Back to top Go down
http://v-driveboat.com
AzDon

AzDon


Posts : 359
Join date : 2011-08-05
Age : 68
Location : Lake Havasu, AZ

Parting out 91 Olds Custom Cruiser rust free Empty
PostSubject: Re: Parting out 91 Olds Custom Cruiser rust free   Parting out 91 Olds Custom Cruiser rust free Icon_minitimeWed Mar 16, 2016 4:56 pm

I'll hafta see what is involved in getting that impact shock out..... What's a fair price for those?
Back to top Go down
http://v-driveboat.com
letrbuk

letrbuk


Posts : 9
Join date : 2016-01-22

Parting out 91 Olds Custom Cruiser rust free Empty
PostSubject: Re: Parting out 91 Olds Custom Cruiser rust free   Parting out 91 Olds Custom Cruiser rust free Icon_minitimeThu Mar 17, 2016 9:35 am

You need to pull the bumper cover and inner steel bumper to get at the impact shocks.
Back to top Go down
letrbuk

letrbuk


Posts : 9
Join date : 2016-01-22

Parting out 91 Olds Custom Cruiser rust free Empty
PostSubject: Re: Parting out 91 Olds Custom Cruiser rust free   Parting out 91 Olds Custom Cruiser rust free Icon_minitimeThu Mar 17, 2016 5:56 pm

My brother found one for me locally.
Back to top Go down
ghetto wagon




Posts : 16
Join date : 2010-04-25

Parting out 91 Olds Custom Cruiser rust free Empty
PostSubject: Re: Parting out 91 Olds Custom Cruiser rust free   Parting out 91 Olds Custom Cruiser rust free Icon_minitimeFri Mar 18, 2016 9:55 pm

Is the Left tail light a Black bezel or the grayish colored bezel?
Back to top Go down
AzDon

AzDon


Posts : 359
Join date : 2011-08-05
Age : 68
Location : Lake Havasu, AZ

Parting out 91 Olds Custom Cruiser rust free Empty
PostSubject: Re: Parting out 91 Olds Custom Cruiser rust free   Parting out 91 Olds Custom Cruiser rust free Icon_minitimeTue Mar 22, 2016 2:44 pm

Left TL doesnt appear to be OCC and has a lower corner broken off.....I have a perfect OCC right TL with the reddish bezel
Back to top Go down
http://v-driveboat.com
AzDon

AzDon


Posts : 359
Join date : 2011-08-05
Age : 68
Location : Lake Havasu, AZ

Parting out 91 Olds Custom Cruiser rust free Empty
PostSubject: Re: Parting out 91 Olds Custom Cruiser rust free   Parting out 91 Olds Custom Cruiser rust free Icon_minitimeMon Apr 04, 2016 8:49 pm

Some other things I can remove from the car that are good:
All door rubbers and overdoor rubbers are awesome
Wiper motor
Plastic cowl grille is perfect
HVAC diaphragms and hoses
Heater core
Evaporator core
spare tire well

I've got the cowl grille removed, but other items mentioned here will depart with the car if nobody claims them....
Back to top Go down
http://v-driveboat.com
stewzer55

stewzer55


Posts : 730
Join date : 2013-11-10
Age : 34
Location : Columbus, Ohio

Parting out 91 Olds Custom Cruiser rust free Empty
PostSubject: Re: Parting out 91 Olds Custom Cruiser rust free   Parting out 91 Olds Custom Cruiser rust free Icon_minitimeTue Apr 05, 2016 12:19 pm

I can use a spare tire well.
Back to top Go down
AzDon

AzDon


Posts : 359
Join date : 2011-08-05
Age : 68
Location : Lake Havasu, AZ

Parting out 91 Olds Custom Cruiser rust free Empty
PostSubject: Re: Parting out 91 Olds Custom Cruiser rust free   Parting out 91 Olds Custom Cruiser rust free Icon_minitimeWed Apr 20, 2016 5:25 pm

Getting close to sending the car away.....

Parting out 91 Olds Custom Cruiser rust free Almost-done

Parting out 91 Olds Custom Cruiser rust free Rear-on-ground

got the rear on the ground, gotta remove the exhaust and the arms

Parting out 91 Olds Custom Cruiser rust free Snakes

About two-thirds of the wiring harness....

Parting out 91 Olds Custom Cruiser rust free Brake-lines

I think somebody wanted these brakelines.....
Back to top Go down
http://v-driveboat.com
Cadet57

Cadet57


Posts : 3047
Join date : 2010-04-13
Age : 37
Location : Chicopee, MA

Parting out 91 Olds Custom Cruiser rust free Empty
PostSubject: Re: Parting out 91 Olds Custom Cruiser rust free   Parting out 91 Olds Custom Cruiser rust free Icon_minitimeThu Apr 21, 2016 9:41 pm

AzDon wrote:

I think somebody wanted these brakelines.....

That was me. Cool
Back to top Go down
AzDon

AzDon


Posts : 359
Join date : 2011-08-05
Age : 68
Location : Lake Havasu, AZ

Parting out 91 Olds Custom Cruiser rust free Empty
PostSubject: Re: Parting out 91 Olds Custom Cruiser rust free   Parting out 91 Olds Custom Cruiser rust free Icon_minitimeFri Apr 22, 2016 3:31 pm

I knew that..... I actually got ALL the lines out without cutting..... The cluster wont fit in a box, though, unless I eliminate (or bend) the right front line and eliminate the line to the rear.....Send offer! (not including shipping) and your zip and I'll get a shipping estimate....Also that body part.... I'm not going to remove it unless we've agreed on a deal..... and I could ship together
Back to top Go down
http://v-driveboat.com
AzDon

AzDon


Posts : 359
Join date : 2011-08-05
Age : 68
Location : Lake Havasu, AZ

Parting out 91 Olds Custom Cruiser rust free Empty
PostSubject: Re: Parting out 91 Olds Custom Cruiser rust free   Parting out 91 Olds Custom Cruiser rust free Icon_minitimeFri Apr 22, 2016 10:25 pm

I'll be rid of this car next week.......
Back to top Go down
http://v-driveboat.com
AzDon

AzDon


Posts : 359
Join date : 2011-08-05
Age : 68
Location : Lake Havasu, AZ

Parting out 91 Olds Custom Cruiser rust free Empty
PostSubject: Re: Parting out 91 Olds Custom Cruiser rust free   Parting out 91 Olds Custom Cruiser rust free Icon_minitimeMon Apr 25, 2016 2:14 pm

Well......Camel Tow just came and picked up the sar after I picked it pretty clean.....At the last minute, I snatched the rear hatch glass, wiper motor, all the side cladding, master/booster and even the rub strips off the roof.......i didn't cut any sections of sheet metal off because I'm not properly equipped.... The driver gave me $20 for the steering column, but everything else is still available
Back to top Go down
http://v-driveboat.com
Chris96Coprice




Posts : 2
Join date : 2015-12-31

Parting out 91 Olds Custom Cruiser rust free Empty
PostSubject: Re: Parting out 91 Olds Custom Cruiser rust free   Parting out 91 Olds Custom Cruiser rust free Icon_minitimeThu Jun 09, 2016 9:40 pm

I need these parts, price shipped to 60014 (crystal lake,IL)

I do not get on here very often, feel free to contact me through email ChrisFish3@hotmail.com

Parting out 91 Olds Custom Cruiser rust free Spoiler-splash-panels
Back to top Go down
AzDon

AzDon


Posts : 359
Join date : 2011-08-05
Age : 68
Location : Lake Havasu, AZ

Parting out 91 Olds Custom Cruiser rust free Empty
PostSubject: Re: Parting out 91 Olds Custom Cruiser rust free   Parting out 91 Olds Custom Cruiser rust free Icon_minitimeSat Jun 11, 2016 6:38 pm

Chris96Coprice wrote:
I need these parts, price shipped to 60014 (crystal lake,IL)

I do not get on here very often, feel free to contact me through email ChrisFish3@hotmail.com

Parting out 91 Olds Custom Cruiser rust free Spoiler-splash-panels

Gone! Sorry.....
Back to top Go down
http://v-driveboat.com
harrisons13

harrisons13


Posts : 156
Join date : 2014-01-16
Location : Long Beach CA

Parting out 91 Olds Custom Cruiser rust free Empty
PostSubject: Re: Parting out 91 Olds Custom Cruiser rust free   Parting out 91 Olds Custom Cruiser rust free Icon_minitimeSat May 06, 2017 11:29 pm

Do you happen to have the Chime module and the assembly it would mount into?
Back to top Go down
https://www.youtube.com/channel/UCkqi6xKihlvfX82nZ3nmCHQ?view_as
Sponsored content





Parting out 91 Olds Custom Cruiser rust free Empty
PostSubject: Re: Parting out 91 Olds Custom Cruiser rust free   Parting out 91 Olds Custom Cruiser rust free Icon_minitime

Back to top Go down
 
Parting out 91 Olds Custom Cruiser rust free
Back to top 
Page 1 of 1
 Similar topics
-
» My last wagon project. Rust-Free 1989 Olds Custom Cruiser
» thinking about parting 1970 vista cruiser in Calif rust free
» 91 Olds Custom Cruiser parting
» Parting out 1991 Oldsmobile Olds Custom Cruiser
» 95 roadmaster rust free body- parting it out

Permissions in this forum:You cannot reply to topics in this forum
GM Longroof Forum :: The Longroof Marketplace :: Parts For Sale-
Jump to: