1993 caprice wagon 3.23 limited slip rear axle assembly

Entire rear axle assembly from a 1993 Chevrolet Caprice wagon.  Has the limited slip, 3.23 gear, and the abs reluctor gear in it. Solid housing with just road crust.  Took the cover off to inspect and everything spins freely and looks ok. Wear pattern on the gears look fine. No major or concerning metal in the oil or on the magnet. The drum brakes need to be refurbished.

$200
Located 45 min west of Jacksonville, Fl in 32087

I can pull the ring and pinion w/ reluctor and ship it in a usps flat  rate box for $216 total. Now the limited slip carrier and ring and pinion would be 46 pounds shipped from 32040 it won’t fit in a flat rate box. I just shipped a ring, pinion, and carrier.

Nah, leave it in one piece. I'm interested in it but haven't been able to pull the trigger just yet. You aren't that far from me at all.

I know that doesn't help you because you most likely want it out of your way ASAP but just wanted to throw that out there.

It’s not in the way. Been some interest. I would only pull it apart if someone wanted it. Just trying to free up some space and help someone out that needs the treasure I hunted down.

I'm interested. Planning to come to daytona in march for wagonfest. PM if that works for you.

Tom

Sure

I will plan to pick this up on my way to wagonfest.

Thank you!

see you soon, daytona bound today

Do not forget to get a 43 tooth driven gear for the VSS if you have a 91-93, and adjust the speedometer setting in the PCM for 94-96.

The book says to use the 42 tooth driven gear, but your speedometer will read about 6 MPH fast. The 43 tooth gear will make it within 3 MPH fast. If you are using a tire larger than 28 inches in diameter, use a 44 tooth gear.

Sold

Airborne455 It was a pleasure to meet you, next: clean, paint, install the rear, smoke time tires, grin

Thanks,

Tom

Hey can I come get it Friday?

Been sold