Muffler fitment?

I was wondering if this specific flowmaster super 44 part number 942548 muffler would fit my 93 wagon?

The inlet and outlet must be on opposite sides. You can use adapter pipes if the pipes are not the same size as the OEM pipes.

If you want to keep your tail pipe, No. If you don't then yes.

Advance auto carries the 44 series on the shelf and should have the offset/offset version that you need.

On the flip side, they will also have a Thrush Welded muffler on the shelf that will work. Knock off Flowmaster at less than half the price.

Most muffler shops should have these as well and can easily adapt them to your factory pipes.

No way it will work with stock tailpipe?

Not really. The outlet needs to be offset not in the center like the muffler you are talking about.

Not this... https://www.amazon.com/Flowmaster-942548-16-Gauge-Aluminized-Opposite/dp/B000QJG1HG   That is offset inlet and center outlet.

You want THIS... https://shop.advanceautoparts.com/p/flowmaster-inc-super-44-series-muffler-25in-offset-inlet-25in-offset-outlet-non-reversible-aggressive-sound-942548/20291377-P     Offset inlet and offset outlet.

Both links you sent have the same part number not sure what number is correct for what, but mine is off set, opposite corners of each other

They do indeed, lol. I didn't pay attention to that at all, oops.

Having looked at the rest of the photos on the Amazon link, it shows offset/offset. Going by that it should work. Ignore my other posts.

I went with the 40 series delta flows. Kept the resonators. It sounds good. Not too loud. A nice rumble, no drone.