| Correct SEM code for Ruby Red? | |
|
+4Cadet57 DBeaSSt silverfox103 toomanytoyz 8 posters |
Author | Message |
---|
toomanytoyz
Posts : 3233 Join date : 2008-11-04 Age : 48 Location : Sandown, NH USA
| Subject: Correct SEM code for Ruby Red? Fri Sep 24, 2010 7:43 am | |
| I thought I had seen it posted on here, even recently, but I can't find it... Anyone know which color code or part number it is for the SEM spray can that matches the Buick Ruby Red?
TIA! | |
|
| |
silverfox103 Moderator
Posts : 3371 Join date : 2008-11-05 Age : 75 Location : Littleton, NH & St. Simons, GA
| Subject: Re: Correct SEM code for Ruby Red? Fri Sep 24, 2010 9:24 am | |
| Ruby Red GM code 79I = SEM 4791
Call VinylPro
1-800-750-7939
Hey Bill, while your painting your new steering wheel, paint that console the correct color!
Tom | |
|
| |
toomanytoyz
Posts : 3233 Join date : 2008-11-04 Age : 48 Location : Sandown, NH USA
| Subject: Re: Correct SEM code for Ruby Red? Fri Sep 24, 2010 10:27 am | |
| It's like you read my mind. May have a couple other additions, too... Thanks for the code. | |
|
| |
Guest Guest
| Subject: Re: Correct SEM code for Ruby Red? Fri Sep 24, 2010 12:38 pm | |
| The red you just gave is different than my TBI red, right? Any insight on that one? |
|
| |
DBeaSSt Admin
Posts : 2585 Join date : 2008-11-04 Age : 54 Location : Front Royal, VA
| Subject: Re: Correct SEM code for Ruby Red? Fri Sep 24, 2010 12:56 pm | |
| Yes it is different. Can't help with a code though, sorry. | |
|
| |
silverfox103 Moderator
Posts : 3371 Join date : 2008-11-05 Age : 75 Location : Littleton, NH & St. Simons, GA
| Subject: Re: Correct SEM code for Ruby Red? Fri Sep 24, 2010 1:49 pm | |
| - Stingroo wrote:
- The red you just gave is different than my TBI red, right? Any insight on that one?
Call VinylPro and talk to Mark, he may be able to help you. Tom C. | |
|
| |
Guest Guest
| Subject: Re: Correct SEM code for Ruby Red? Fri Sep 24, 2010 1:59 pm | |
| On it. Cause I grabbed that blue Blazer console over the summer... it's just begging to go in the wagon. |
|
| |
Cadet57
Posts : 3047 Join date : 2010-04-13 Age : 37 Location : Chicopee, MA
| Subject: Re: Correct SEM code for Ruby Red? Fri Sep 24, 2010 4:55 pm | |
| - Stingroo wrote:
- On it. Cause I grabbed that blue Blazer console over the summer... it's just begging to go in the wagon.
Thats what i'm saying with my Riv console. I now have 9C1 vinyl buckets that I need to SEM too, so thankfully I don't need to cut my bench. | |
|
| |
Guest Guest
| Subject: Re: Correct SEM code for Ruby Red? Fri Sep 24, 2010 5:35 pm | |
| I still need to cut my bench, but it's whatever. |
|
| |
Cadet57
Posts : 3047 Join date : 2010-04-13 Age : 37 Location : Chicopee, MA
| Subject: Re: Correct SEM code for Ruby Red? Fri Sep 24, 2010 5:42 pm | |
| - Stingroo wrote:
- I still need to cut my bench, but it's whatever.
If you were closer, id say come to my local JY and pull the ruby passenger cloth seat out of the '93 Caprice here. Thing is super clean. Saves you from having to cut your seat. | |
|
| |
Guest Guest
| Subject: Re: Correct SEM code for Ruby Red? Fri Sep 24, 2010 8:39 pm | |
| I'd need a power seat though. (I think?) |
|
| |
Cadet57
Posts : 3047 Join date : 2010-04-13 Age : 37 Location : Chicopee, MA
| Subject: Re: Correct SEM code for Ruby Red? Fri Sep 24, 2010 8:40 pm | |
| - Stingroo wrote:
- I'd need a power seat though. (I think?)
You can swap the rails, but its an LS sedan, it has dual power seats. | |
|
| |
Guest Guest
| Subject: Re: Correct SEM code for Ruby Red? Fri Sep 24, 2010 8:47 pm | |
| |
|
| |
81X11
Posts : 9876 Join date : 2010-06-23 Age : 50 Location : Round Rock Texas
| Subject: Re: Correct SEM code for Ruby Red? Fri Apr 01, 2011 8:42 am | |
| Ok I'm finally going to order this...today. Just to BE SURE, this is the correct color for my 96 RMW....right?? Ruby Red GM code 79I = SEM 4791 -Mike | |
|
| |
silverfox103 Moderator
Posts : 3371 Join date : 2008-11-05 Age : 75 Location : Littleton, NH & St. Simons, GA
| Subject: Re: Correct SEM code for Ruby Red? Fri Apr 01, 2011 9:01 am | |
| yes, Mike call vinylpro.com, they will set you up with everything you need.
Tom | |
|
| |
81X11
Posts : 9876 Join date : 2010-06-23 Age : 50 Location : Round Rock Texas
| Subject: Re: Correct SEM code for Ruby Red? Fri Apr 01, 2011 9:33 am | |
| Called and its a custom-blended color not pre-sold in aresol rattle-cans. $13.95....with $12 shipping....ouch. Ordered anyway, planning to paint that tan door panel trim for around the door handles. I've given up on finding red, and since I'm about to pull the panals to fix the cracks, I don't want to put broken trim back on.
Such fun!
-Mike | |
|
| |
silverfox103 Moderator
Posts : 3371 Join date : 2008-11-05 Age : 75 Location : Littleton, NH & St. Simons, GA
| Subject: Re: Correct SEM code for Ruby Red? Fri Apr 01, 2011 10:51 am | |
| I should have mentioned they sold me a prep solution and a soap as part of the process. I always used that (whether it was necessary, I don't know) have had great results. It is expensive no doubt; but it is not Krylon.
Tom | |
|
| |
81X11
Posts : 9876 Join date : 2010-06-23 Age : 50 Location : Round Rock Texas
| Subject: Re: Correct SEM code for Ruby Red? Fri Apr 01, 2011 11:12 am | |
| - silverfox103 wrote:
- I should have mentioned they sold me a prep solution and a soap as part of the process. I always used that (whether it was necessary, I don't know) have had great results. It is expensive no doubt; but it is not Krylon.
Tom I'm going to use alcohol to clean the parts I think. | |
|
| |
Guest Guest
| Subject: Re: Correct SEM code for Ruby Red? Fri Apr 01, 2011 11:13 am | |
| ^ That's what I was going to do with my console.
|
|
| |
phantom 309
Posts : 5848 Join date : 2008-12-28 Age : 114
| Subject: Re: Correct SEM code for Ruby Red? Fri Apr 01, 2011 11:33 pm | |
| - 81X11 wrote:
- silverfox103 wrote:
- I should have mentioned they sold me a prep solution and a soap as part of the process. I always used that (whether it was necessary, I don't know) have had great results. It is expensive no doubt; but it is not Krylon.
Tom I'm going to use alcohol to clean the parts I think. use scotch pads and dawn dish detergent,.use the alcohol last,. alcohol evaporates too quickly and leaves residue behind,. you need strong detergent flushed with lots of water,. lots of scrubbing with the scotch pads,.then awipe down with alcohol if you want,.but i prefer mineral spirits,.i did all the 96 impala stuff in the front of the black wagon,.console seats steering column etc,. and re-did all the rear plastic parts in the back,.i used 3 qts of 4791 all together,. not cheap either,. Nick | |
|
| |
81X11
Posts : 9876 Join date : 2010-06-23 Age : 50 Location : Round Rock Texas
| Subject: Re: Correct SEM code for Ruby Red? Sat Apr 02, 2011 2:07 pm | |
| I just want to do the door panel trim around the door handles, and possibly the vinyl parts of my steering wheel. Hope I don't need 3qts to do that! ; ) | |
|
| |
Cadet57
Posts : 3047 Join date : 2010-04-13 Age : 37 Location : Chicopee, MA
| Subject: Re: Correct SEM code for Ruby Red? Sat Apr 02, 2011 2:26 pm | |
| I did a dash bezel, my Riv console and two 9C1 buckets with 2 1/2 cans, each piece has at least two coats too. FWIW. | |
|
| |
phantom 309
Posts : 5848 Join date : 2008-12-28 Age : 114
| Subject: Re: Correct SEM code for Ruby Red? Sat Apr 02, 2011 3:31 pm | |
| i also did the lumina sreering wheel leather parts too,. i used steel wool on the leather to give it a slightly rough surface,. turned out great,. | |
|
| |
Guest Guest
| Subject: Re: Correct SEM code for Ruby Red? Sat Apr 02, 2011 8:25 pm | |
| Steel wool eh? Thanks for the tip! I have to do my Lumina wheel too.... |
|
| |
The Roadmaster
Posts : 60 Join date : 2010-04-13 Location : Automobile Capital of the World
| |
| |
silverfox103 Moderator
Posts : 3371 Join date : 2008-11-05 Age : 75 Location : Littleton, NH & St. Simons, GA
| Subject: Re: Correct SEM code for Ruby Red? Mon Apr 11, 2011 2:17 pm | |
| Huh? Not sure what you are talking about. 94 to 96, are SEM #4791 Ruby Red, 91 to 93 are an entirely different color.
Tom C. | |
|
| |
81X11
Posts : 9876 Join date : 2010-06-23 Age : 50 Location : Round Rock Texas
| Subject: Re: Correct SEM code for Ruby Red? Mon Apr 11, 2011 2:17 pm | |
| Well SUPER. That was $25 well spent.
I have the can on my workbench. Was planning to paint the door trim soon.
SO anyone have any idea what color I did need?
-Mike | |
|
| |
81X11
Posts : 9876 Join date : 2010-06-23 Age : 50 Location : Round Rock Texas
| Subject: Re: Correct SEM code for Ruby Red? Mon Apr 11, 2011 2:18 pm | |
| I'll cross my fingers and try what I had made up shortly....will let the forum know if it matches.
-Mike | |
|
| |
Guest Guest
| Subject: Re: Correct SEM code for Ruby Red? Thu Jun 30, 2011 2:57 pm | |
| Ugh. Vinyl Pro wants $20 a can for their SEM's now.
That's ridiculous. |
|
| |
Fred Kiehl
Posts : 7290 Join date : 2009-11-13 Age : 76 Location : Largo, FL 33774
| Subject: Re: Correct SEM code for Ruby Red? Thu Jun 30, 2011 3:30 pm | |
| I just bought some about 3 months ago for $13 per can + shipping. That is a pretty steep price hike. | |
|
| |
Guest Guest
| Subject: Re: Correct SEM code for Ruby Red? Thu Jun 30, 2011 3:44 pm | |
| Yeah, I just called to order and they told me $19.99 a can plus shipping.
That's not cool, man. |
|
| |
Guest Guest
| Subject: Re: Correct SEM code for Ruby Red? Thu Jun 30, 2011 4:03 pm | |
| Ray I told you once before,go to TCPGlobal and their SEM paints for interiors run from 11 to 13 dollars a can.Just left their site.That dont include S&H. |
|
| |
Guest Guest
| Subject: Re: Correct SEM code for Ruby Red? Thu Jun 30, 2011 4:05 pm | |
| Definitely checking them out now. Was trying to remember the name of the place. Thanks. lol |
|
| |
Guest Guest
| Subject: Re: Correct SEM code for Ruby Red? Thu Jun 30, 2011 4:10 pm | |
| They are by far the most helpful and reasonably priced out there.I have bought some tools from them too and their prices are very good. |
|
| |
Guest Guest
| Subject: Re: Correct SEM code for Ruby Red? Thu Jun 30, 2011 4:47 pm | |
| Just got off the phone with them. They told me $29.95 a can.
This is ridiculous. |
|
| |
Guest Guest
| Subject: Re: Correct SEM code for Ruby Red? Thu Jun 30, 2011 5:17 pm | |
| RAY calm down they probably thought you were buying paint to HUFF.Go back to TCP Global and hit their SEM section and then you will see what I am talking about. |
|
| |
Guest Guest
| Subject: Re: Correct SEM code for Ruby Red? Thu Jun 30, 2011 5:19 pm | |
| They don't show the number I need listed there. It's $11.26 for current colors, and an extortion-worthy $29.95 for custom mixes. |
|
| |
Cadet57
Posts : 3047 Join date : 2010-04-13 Age : 37 Location : Chicopee, MA
| Subject: Re: Correct SEM code for Ruby Red? Thu Jun 30, 2011 7:44 pm | |
| Sting, custom mixes will always cost more. Vinyl pro only went up a couple bucks on the custom mixes since I paid $56 for 3 cans | |
|
| |
Guest Guest
| Subject: Re: Correct SEM code for Ruby Red? Thu Jun 30, 2011 8:32 pm | |
| I know, I know. I just don't want to drop $50 on paint right now. Seems so overpriced.
Need a better job... lol |
|
| |
Cadet57
Posts : 3047 Join date : 2010-04-13 Age : 37 Location : Chicopee, MA
| Subject: Re: Correct SEM code for Ruby Red? Thu Jun 30, 2011 8:34 pm | |
| - Stingroo wrote:
- I know, I know. I just don't want to drop $50 on paint right now. Seems so overpriced.
Need a better job... lol It is but at the same time its not. It's a lot when you're a broke college kid (I share the pain, trust me) but when you consider its matched by the person and custom filled and blended. It doesnt seem so bad. Once you have a properly matched batch you'll appreciate it. | |
|
| |
81X11
Posts : 9876 Join date : 2010-06-23 Age : 50 Location : Round Rock Texas
| Subject: Re: Correct SEM code for Ruby Red? Wed Jul 13, 2011 1:02 am | |
| Just an update, my red SEM'd interior is holding up fine. No fading, chipping or scratching so far. Happy with it!
-Mike | |
|
| |
Sponsored content
| Subject: Re: Correct SEM code for Ruby Red? | |
| |
|
| |
| Correct SEM code for Ruby Red? | |
|