FL Waggin' Fest - Parts Swap thread

Post up in here, parts offered and parts wanted.

I have a bunch of stuff I need to get rid of. Personally, I like swapping parts for other parts, but cash is nice too. I'm not going to price out everything on here, but if you see something, shoot me a PM and we will work out something, I want to get rid of this stuff.

If my list is vague (I'm not even sure about everything I have) and you are looking for something in particular post it up.

92 - RMW Dark Blue interior pieces.
1. I have the dash surround (with plastic wood) in nice shape.
2. Set of 4 CLOTH topped door panels (Kinda want to put them in the OCC, but I'm lazy) - will dig out for pics if someone is serious, but recall they were ok and only set I've ever seen.
3. RM dark blue TBI Steering column with key, complete w/air bag. -$60
3. Set of Roadmaster 91-94 (small cap) rims. (pretty sure I have 4 caps too) - Need cleaning, bad tirres $100
4. Set of OCC rims and caps with Black in the ollds logo (91s) - need cleaning, bad tires $100
5. SEDAN fuel tank straps from 96-9C1 (dirty, may have a tiny bit of surface rust but very clean) -
6. Driver and Passenger 9C1 Door Panels (decent shape) -
7. Several sets of headlights with black plastic mounts, just bolt 'em in (no bulbs) (lenses in various states)
8. Rust free spare tire well cut off under belt trim
9. Couple of twilight sentinal boxes.
10. 92 OCC cladding: both rear quarters, drivers door and I think front passenger door (if not then the back, by I know I'm missing a door off each side) not perfect.
11. 96 9c1 - AC condensor
12. Set of electric fans
13 Donut spare
14 Brand New RMW rim with OE Genral tire from 1994 - still hase dye lines on treads
15 Brand new Caprice steel wheel with OE General tire from 1994 - 100% tread -nubbies still on it.
16. Rear grab bars in dark blue (no cargo light covers)
17 Dark Maple Cargo Cover
18. MIsc Dark blue interior bits (visors, a-pillars, Bpillars, etc.)

I know I have more stuff as well, this was off the top of my head....will update as I uncover stuff.

Things I want/need:

T-56 Crossmember
Clutch, shifter, Pedal Assembly, other swap parts

#17. Cargo cover.


Details plz.

I need a blue carpet. Not sure if sedans and wagons are the same but they should be.

Gastt wrote:

I need a blue carpet. Not sure if sedans and wagons are the same but they should be.

They do. Personally, I don't have a carpet but others may.

My list:

2x wagon rear bumpers. One DGGM the other LAB. -$20
Caprice front bumper, LAB. -$20
Front wagon/caprice fenders. DGGM off a WB4 Roadie with the chrome trim-$40 each
Rear hatch glass. With defroster, no handle. $45
Caprice wagon DS rear quarter glass-$65
Tan RMW dash. Good shape, fading on front edges. $30
94 RMW dash front. Good shape, far right vent needs to be re-attached- $30
96 RMW tan column comes with ignition key and module-$60
95 Caprice blue column with wheel/bag. Wheel in rough shape, comes with ignition key and module, no turn stalk lever-$50
Door glass-$25 each (2x frnt left, 2x frnt right, 1x wagon rear lft, 1x wagon rear right)
2x brake boosters-$40 each
96 ABS pump-$30
Wagon rear wiper motor-$30
front wiper motor-$30
RMW headlight harness with cornering-$30
Misc tan and blue interior plastics-PM with needs
Headlights- $25 each
96 RMW cluster showing around 152k-$30
RMW tails lights-$25 each
Tan RMW vista shades and frame-$40
Tan Lighted visors-$10
Door panels- 1 tan front right, rear left and right in good shape. $60 each.
Aftermarket blue carpet. Looks like TBI blue, was cut wrong, doesn't completely cover under rear DS seat- $40
Black FWB steering wheel with bag-$20

Parts I need:

9C1 rear sway bar
Any color cover from a fleetwood steering column. I need the cover that covers the wires behind the turn stalk

Need RMW grille! Grille procured

Not much for sale:

2 Magnaflow 3" exhaust tips. the ID is actually 2 1/2 it looks like
Cruise control setup with box, wires and stalk. For TBI or LT1

Looking for a grey BOX caprice steering wheel. Would have wanted to have it installed for FL but not that big a deal.

I have two Oldsmobile Grills, a 91 & 92. $50 each, which is what I paid for them.

Looking for gas tank shields front side, both passenger & driver. Don't need the sides. Actually, I'd be interested in two sets.


Tom

Hopefully there are a few wagons at the yard on Friday. I'll be spending my time there. :p

I have the list in my Parts Garage listing in the Vendor section. https://gmlongroof.4umer.com/t5796-parts-garage

I will discount pricing any part with shipping included.

Give me a couple of day's notice. I have a lot of small parts that are not listed due to the space involved. My inventory is subject to change if I sell anything on ebay.

I'm looking for a few things for my white/tan 96 Roady wagon. First, the rear tail gate interior trim panel in tan, don't want to paint one unless I have to. Secondly, really nice FACTORY tan carpet, or even the rear half (back seat area) if you have carpet that is shot in the front but nice in the rear. I assume it could be cut under the seat, and not seen? Anybody have a really mint front bumper cover with the chrome strips? I don't need the rebar or energy absorbers. If I can think of anything else, I'll post it. Thanks.

Stingroo wrote:

Hopefully there are a few wagons at the yard on Friday. I'll be spending my time there. :p

Is there a yard close to the hotel? I'm coming in Friday afternoon (after hopefully stopping at the pull a part in Tampa).

There is one heavily picked 94 Caprice sedan in Tampa, unless they get more in. You can check for new arrivals at http://lkq180.com/.

There is an LKQ just out side of town at 3157 Speedway Blvd. They have a list of cars and search function on their web site at http://www.lkqselfserve.com/locations/LKQ_Self_Service_Auto_Parts_-_Daytona_Beach-225. I saw a 91 a 93 and 4 94 Caprices but they do not note sedans or wagons.

I would do a search before heading there and getting negative results on the car you need parts for.

Mark 96 Roady wrote:

Stingroo wrote:

Hopefully there are a few wagons at the yard on Friday. I'll be spending my time there. :p

Is there a yard close to the hotel? I'm coming in Friday afternoon (after hopefully stopping at the pull a part in Tampa).

Yep! I'm down for a yard run. I'll be coming down Friday morning-ish. Totally bailing on classes that day. lol

I won't be in until later Friday, will have to miss that yard run

Mark 96 Roady wrote:

I'm looking for a few things for my white/tan 96 Roady wagon. First, the rear tail gate interior trim panel in tan, don't want to paint one unless I have to. Secondly, really nice FACTORY tan carpet, or even the rear half (back seat area) if you have carpet that is shot in the front but nice in the rear. I assume it could be cut under the seat, and not seen? Anybody have a really mint front bumper cover with the chrome strips? I don't need the rebar or energy absorbers. If I can think of anything else, I'll post it. Thanks.

Anybody?? I'm coming with the trunk of the Fleetwood empty, and my wallet ready to buy some parts!!

Looking for

Fleetwood:
MINT cream colored steering wheel
MINT set of cream colored seats
MINT set of floor mats
Plastic drivers inner fender
Tension spring for the back of the door pull

Gastt wrote:

Looking for

Fleetwood:
MINT cream colored steering wheel
MINT set of cream colored seats
MINT set of floor mats
Plastic drivers inner fender
Tension spring for the back of the door pull

Plastic drivers inner fender?
I have the entire door pull insert, which side are you looking for?

Yes the Plastic inner fender... goes in front of the wheel, bolts to the rad support and fender.. Has an air dam. I'm not looking for the whole door pull insert.. trying to see if anyone has a junk one laying around I can get the spring out of.

That is the wheelhouse extension. 99% of them are broken. I have only ever seen one that was servicable.

My passenger side is good. Previous owner hit something and shattered the drivers side.

They are 17 plus years old, and whatever they are made from has become extremely brittle. The usually are shattered just from normal usage. You might find it to your avantage to make a mold of the one you have for reproduction purposes. If I see another good one, I may make a mold of it for that same reason. A fiberglass reproduction would not be difficult to make, and a good number of them would be appreciated by other FW owners.

Fred Kiehl wrote:

They are 17 plus years old, and whatever they are made from has become extremely brittle. The usually are shattered just from normal usage. You might find it to your avantage to make a mold of the one you have for reproduction purposes. If I see another good one, I may make a mold of it for that same reason. A fiberglass reproduction would not be difficult to make, and a good number of them would be appreciated by other FW owners.

not up here, the only time we find em cracked up is when there has been front end damage. parking curbs and such do them in, but there are still lots of them around here

I installed a piece of used glass in my driver's side rear door, and found a large scratch in it after installation. Does anyone have a nice rear door window, that we can work a trade for? I may even give an installation clinic it at the motel on Sat. evening for those who have never installed door glass. It isn't just a matter of popping the ball sockets, and swapping glass for the rear doors.

Anyone who orders a $50 or more part from me, that I can bring along, will get their choice of a steering wheel puller, or a universal oil filter wrench for free.

LT1 transmission crossmember
LT1 stock cat to muffler pipes
95 Caprice Wagon rear end, 2.56 open, no drums, axles too if one so wants
Stock Caprice Wagon rear springs x 2 - approx 100k on them
Home plates, first base, stock intakes
Factory air shocks x 2

I have a good PS side extension and a broken but fixable DS one. I had thought about making a mold, but what's the best way to do it? I was thinking coating it with some release agent and fiber glassing it. Any ideas?

95BRMW wrote:

I have a good PS side extension and a broken but fixable DS one. I had thought about making a mold, but what's the best way to do it? I was thinking coating it with some release agent and fiber glassing it. Any ideas?

Micromark carries plastic casting/molding supplies. But not sure how big these pieces are. I know the kits are pricey.

Release compound, and glassing is the preferred method. Then you can make copies with glass cloth, and black dye in the resin. I would suggest using "crowfoot" weave cloth. It does not cost any more than straight weave, and goes around compound curves better. You should use about 2-3 layers of 6 oz cloth to achieve the same thickness. If you have a little cloth over the edge of the part, you can cut it with a razor when it is in the paritally cured (green) stage.

Thanks, another project for the list
/thread jack

cam retainer plate bolts for a roller lifter engine. anyone have a set to sell?

Updated my list, also have a set of N97's and some lace caprice rims but would rather not lug those down.:

Pair of 3" Magnaflow exhaust tips $20

Reybestos "Service Grade" (9C1) idler arm, new in box. #4501082B. $12.

2 Cans of SEM 17123 (Caprice grey) Leather/Vinyl spray. NOT for plastic trim. $30.

Cruise control set up. Includes box, wiring and control stalk. $30

91-93 blue vinyl rear sedan bench skins. Good shape, will fit TBI wagons $15

5.7 TBI airbox front $10

Caprice wire hubcaps. Good shape, set of 5. Includes center caps, bolts, and wheel mounts. $50

3 Caprice lace alloy center caps. Good shape. $15

Caprice grill support $10

Mevotech poly rear control arm bushings, new in boxes. Complete set for the lowers. Half set for the uppers. $35

Timken pinion seal, $7 shipped.

I need a passenger front door seal for the bottom of the door...

Gastt wrote:

I need a passenger front door seal for the bottom of the door...

Stingroo is going to the LKQ in Daytona, he could pick on up for you.