| | Stock sway bar size? |  |
|
|
| Author | Message |
|---|
Guest
Guest
| Subject: Stock sway bar size?  Thu Sep 05, 2013 9:45 pm | |
| Looking for new bushings. Mine are crap. What's the diameter of a stock wagon swaybar, if anyone happens to know? |
|
| | |
Gastt
Posts : 525
Join date : 2010-07-30
Age : 36
Location : Treasure Coast, FL
| | Subject: Re: Stock sway bar size? Thu Sep 05, 2013 10:28 pm | |
| | |
|
| | |
Cadet57
Posts : 3047
Join date : 2010-04-13
Age : 37
Location : Chicopee, MA
| | Subject: Re: Stock sway bar size? Sat May 24, 2014 1:48 pm | |
| *Bump*
I'm in the process of doing the same. Rockauto and Summit says our cars got 30mm. Is 28 or 30 correct? | |
|
| | |
jasonlachapelle
Posts : 1160
Join date : 2011-01-24
Age : 41
Location : CFB Bagotville, QC.
| | Subject: Re: Stock sway bar size? Sun May 25, 2014 8:17 am | |
| Both. Check to see which you have 1st. If you have the 28mm, you can probably score a cheap 30mm at the junkyard. I've given a lot of them away over the years. | |
|
| | |
jayoldschool
Posts : 2728
Join date : 2009-06-14
| | Subject: Re: Stock sway bar size? Sun May 25, 2014 1:49 pm | |
| And, the quickest way to check is with a 28mm open end wrench  | |
|
| | |
Cadet57
Posts : 3047
Join date : 2010-04-13
Age : 37
Location : Chicopee, MA
| |
| | |
jasonlachapelle
Posts : 1160
Join date : 2011-01-24
Age : 41
Location : CFB Bagotville, QC.
| | Subject: Re: Stock sway bar size? Sun May 25, 2014 3:37 pm | |
| I don't have a 28mm open wrench so I would use a vernier, graduated crescent wrench, or a piece of string and divide by pi. Assuming you can't trust the RPO codes... | |
|
| | |
Cadet57
Posts : 3047
Join date : 2010-04-13
Age : 37
Location : Chicopee, MA
| | Subject: Re: Stock sway bar size? Sun May 25, 2014 4:17 pm | |
| - jasonlachapelle wrote:
- I don't have a 28mm open wrench so I would use a vernier, graduated crescent wrench, or a piece of string and divide by pi. Assuming you can't trust the RPO codes...
AFAIK, its the original sway bar. But what that means the car got from the factory is a whole different animal. | |
|
| | |
Sponsored content
| | Subject: Re: Stock sway bar size? | |
| |
|
| | |
| | Stock sway bar size? | |
|
